Manufacturing & Production Jobs

	Manufacturing & Production Jobs
11/09/2007 Sr. Manufacturing Engineer Candidate should have a BSME or related degree with 2+yrs DOD or Aerospace exp. Lean Six Sigma, ISO, FAR standards . Must be able to prepare work orders detailed manufacturing plans/prod. drawings for DOD Aircraft Structural platforms. Prioritize tool design, methods, and material procurement. Skills in CAITV, Autocad and basic Catia usage. Capabilities in SPC, process mapping,sketch concept, Geometric dimensioning ,tolerance,& root cause analysis. Coordinate with Process, Quality and upper management. US citizen, well spoken, Client contact, 10% travel. Co. prefers Contract to Hire. Will consider straight perm interview. 65K-75K perks. DOE Full benefits, Relocation available. Company Name: Confidential Apply for this Position
09/12/2007 Manufacturing Test Engineer Responsible for providing Manufacturing with technical support in: RF Test, Power Supply Test, System Test, and New part/product introduction. Provide technical direction to the test areas to troubleshoot and repair product. Improve the manufacturing test and screening processes that result in cost reductions and increased throughput, and higher reliability. Create and maintain test procedures and specifications. Evaluate microwave components and suppliers. Create Bill of material (BOM) and ECO generation. Failure analysis of various assemblies and components. Provide day to day support to the production lines. Assist Engineering as needed with new product introduction into Manufacturing. Skills/Training Required: · Candidate must have experience using or manufacturing high power microwave devices such as TWTs or Klystrons. · Candidate must be skilled in specifying, and performing high power RF test processes. · Candidate must have experience in cost reduction and reliability improvement through testing and screening. · Candidate must have experience working in a fast paced production environment. · Experience designing products for airborne applications a plus. High Voltage work experience is a plus Years Experience Required: At least five years of experience specifying, and performing RF test processes with high power microwave devices such as TWTs or Klystrons. Education Required: B.S. Degree in Electrical Engineering or equivalent Company Name: Xicom Technology Apply for this Position
07/31/2007 Manufacturing Engineer Focus will be to target programs for cost reduction, process improvements and cycle time reduction, including support to resolve process or material related issues. Will also support the new projected business. RequirementsExperienced in manufacturing processes and cost improvements in the following areas: substrate assemblies, PWB assemblies and higher level integrated RF assemblies, epoxies, solders, sputtering, metallization, machining, material analysis, chemical analysis and failure analysis. Develop manufacturing documentation, tooling and fixtures (AutoCAD experience) for high reliability space and military products. Familiar with MIL-SPECS, device screening and environmental/Qual testing Provide technical support to customers and suppliers Company Name: Defense Talent Network Exe Search Apply for this Position
04/06/2007 SR. Manufacturing Engineer At least 5 years progressive experience in manufacturing support, process and fixture design, CAD, problem solving, and product documentation practices in an RF environment. Excellent written and oral communications skills Ability to utilize software applications such as Excel, Word, Project, and Autocad . Familiarity with Eagleware and other design suites is a plus An Engineering Degree is desirable but not required if life experience is adequate Demonstrated mechanical and RF aptitude Training and /or experience in designing for product manufacturability Ability to work cooperatively with all employees and management. Working knowledge of MRP and Inventory Control practices Position Responsibilities Develop and document time standards / processes for all manufactured products including Instruments, Filters, Components, EAS and Sub-Systems Act as production liaison to Product Engineering on planning and transitional issues related to emerging and developing products in terms of product structure, RoHs compliance, documentation, identification of tools and fixtures , prototype builds, and other issues Develop, document, and catalog assembly / test fixtures as required for all manufactured products Review and approve all Engineering /ISO documents released to various Production departments Review, approve and communicate ECN’s on behalf of various production departments, Value Engineering Ongoing evaluation of existing processes and fixtures for efficiency improvements, Ongoing review of product structure and material content for cost savings and SKU reduction Review all documentation packages, products, practices, and processes for manufacturability and cost improvement opportunities. Participate in MRB meetings as required Work with Purchasing in resolving technical issues with Contract Manufacturers as required Evaluate and recommend required (production) capital equipment. Assume responsibility for RoHs compliance and maintenance for released products and conversion of non-RoHs products. All other special projects and duties as required by management. Company Name: Defense Talent Network Exe Search Apply for this Position
03/15/2007 OPERATIONS ASSOCIATE ASSEMBLY IV RESPONSIBILITIES: ' Meet production schedules, productivity goals, and quality standards ' Perform assembly, inspection, test, and rework operations in compliance with instructions and ISO 9000 requirements ' Soldering & wiring ' Optical fiber splicing ' Mechanical assembly ' Visual inspection, mechanical inspection & electrical testing ' Material handling, material control, and storage ' Maintain a clean and safe work area ' Production equipment operation & maintenance ' Identify, segregate, and disposition nonconforming material ' Marking & labeling product, equipment, and containers ' Material receipt, handling, & storage (includes material control & cycle counting) ' Packing & shipping operations ' Perform Shop Floor Control System data collection, SPC charting, & record keeping ' Enforce quality, safety, calibration, inventory and ESD control practices ' Train associates & peers ' Participate in corrective and preventive action to improve product quality & productivity ' Promote teamwork by helping others and being a good teammate ' Support customer visits & audits ' Understand and practice safety policies and procedures in the work place. 2. AUTHORITY: ' Consistent with Responsibilities 3. INTERFACE WITH OTHERS: ' This position will interface with all organizations as required to perform job responsibilities. Primary interface is with the test technicians, shop supervisor and process engineering. 4. MINIMUM QUALIFICATIONS: ' Education: High School Diploma or equivalent required, A.S. degree preferred ' Certifications preferred: ESD, forklift, blueprint reading, soldering, solder inspection, solder rework, fiber splicing, metrology ' Skills required: basic math, reading comprehension, visual inspection, mechanical assembly, soldering, ESD prevention, safety ' Skills preferred: component identification, quality improvement techniques, fiber splice, metrology methods (verniers, micrometers, gage blocks, etc.), industry workmanship standards, material control, MRP software, PC software applications, visual aids, ISO 9000 standards ' Experience: Three years previous experience in electronic assembly and test preferred ' Must meet pre-employment testing qualifications. Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 PROCESS ENGINEER III Job Description - MFA MANUFACTURING/MATERIALS ENGINEER FOR RF MICROSTRIP AND STRIPLINE ASSEMBLIES * Develop and document assembly methods for the manufacture of Multi-Function Assemblies including: * Connector installation * Epoxy and solder circuit attach (soft-board and ceramic) * Epoxy and solder die attach * Wire bonding (thermo-compression and ultrasonic) * Laser welding * Finishing (paint, marking, and laser engraving) ' Circuit Board Fabrication ' Surface Mount assembly * Develop procedures for handling and cleaning of components and assemblies including those which contain MMIC devices * Possess and apply knowledge of the theoretical bases for manufacturing processes and materials, such as: * Epoxies ' Encapsulants ' Conformal Coatings * Solders * Solvents * Plating * Metallurgy * Apply and interpret state-of-the-art analytical and design tools, such as: * Thermal analysis * Structural analysis * Design of experiments * Finite element analysis * SEM * Auger * CAD/CAM * Possess and apply mechanical aptitude and mechanical design capabilities to tasks such as: * Fixture design and development * Development of machine schedules (epoxy dispense, pick & place, wire bonding, etc.) * Develop automated assembly techniques for: * Epoxy dispense * Pick and place * Wire bonding * Chip-on-board * Carrier level testing ' SMT * Develop and execute IR&D and qualification plans for manufacturing materials and processes. * Develop and execute continuous improvement plans for both cost and reliability * Lead assembly teams to meet throughput and quality requirements * Perform failure analyses and develop corrective action plans for process and mechanical related failures * Also responsible for: * Capital equipment selection and set-up * Process documentation and revisions * Material dispositions Education/Experience Requirement: B.S. with a minimum if 5 years experience or M.S. with a minimum of 2 years experience ' Security Clearance is required ' Overtime (As required) ' Some travel is required. Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 Senior Product Engineer-SPE Job Description - Lead the RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. The ideal candidate will possess a demonstrated broad and deep understanding of modern commercial radio design and communications systems, including software defined radios, linear transmitters, high sensitivity receivers, interference mitigation, design miniaturization, high reliability and design to cost. Understanding of and effective interface with companion disciplines, including antennas and propagation, digital circuits, embedded software, and networking systems is vital. The candidate will provide expert guidance in quantifiably assessing multiple divergent technologies and implementation approaches for their respective strengths and weaknesses in real world environments, and the ability to research and apply technology standards and associated protocols is a must. Project leadership is expected, with the potential for larger team management in future. BSEE and 12+ years design engineering experience, including specific RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. Advanced degrees may be applied toward a portion of the experience requirement. Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 SUPERVISOR MANUFACTURING Job Description - ' Perform Management Duties for the Following Functions and Areas: ' Production assembly, inspection, test, troubleshoot, and rework operations ' Shop Floor Control (Quality, Inventory Accuracy, ESD Control, Safety) ' Lead and supervise activities as required to meet production goals ' Maintain shop quality control processes and comply with ISO 9000 Requirements ' Develop and manage an effective shop floor control process including material control, ESD control, safety, and cleanliness ' Develop and maintain shift schedules and capacity requirements plans ' Staff and ensure training of production personnel ' Develop and maintain production equipment maintenance & calibration program ' Develop and maintain ESD control program and associated supplies ' Train others in the use of the maintenance & calibration software applications ' Train others on ESD control processes and procedures ' Perform audits to ensure compliance to ESD and calibration process and procedures ' Develop and maintain an effective shop change control process ' Develop and manage time keeping process, including attendance policies ' Develop and maintain work instructions, performance metrics, and records for shop floor activities ' Budget, manage, and maintain shop expense supplies ' Provide periodic performance feed back and reviews for assigned personnel ' Promote teamwork by helping others and being a good teammate ' Lead corrective and preventive action to improve product quality & productivity ' Support customer visits & audits ' Support company and facility Environmental Safety and Health (ES&H) policies and programs by: - supporting and meeting annual and long-term ES&H objectives - including ES&H principles in shop procedures, equipment purchases, and equipment/product design - attending appropriate ES&H training - providing information for accident and incident investigations and assisting in implementation of corrective actions. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Manufacturing Engineer I Job Description - Support the production of new and existing products in a group that designs and manufactures antennas, connectors and cable assemblies for the space and defense industry. Responsibilities include reviewing new designs and making changes to improve manufacturability, writing final assembly procedures, and troubleshooting manufacturing problems. The engineer will also work to improve yields through the use of statistical process control and generate maintenance procedures for equipment. The engineer will identify tooling requirements and work with the tooling engineer in designing new tools that use the principles of 'mistake-proofing'. The engineer will work with production to set up continuous flow cells to assemble cables. Experience -: B.S. or M.S. in Engineering and five years of related experience. Job requirements: Must have excellent mechanical aptitude. Candidate must also have good writing skills and be willing to work in a dynamic environment. Experience or training in lean manufacturing principles and statistical process control is a plus. Degree(s) in Mechanical, Industrial, or Chemical Engineering preferred. United States Citizenship or permanent residence required. Security clearance may be required. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Senior Production Engineer Job Description - * Develop and document assembly methods for the manufacture of telemetry and data link modules for both aerospace & defense and industrial/commercial applications: * Circuit board fabrication ' Surface Mount Assembly ' Connector installation * Epoxy and solder circuit attach (soft-board and ceramic) * Epoxy and solder die attach * Wirebonding (thermo-compression and ultrasonic) * Laser welding * Finishing (paint, marking, and laser engraving) * Develop procedures for handling and cleaning of components and assemblies including those, which contain MMIC devices * Possess and apply knowledge of the theoretical bases for manufacturing processes and materials, such as: * Epoxies ' Encapsulants ' Conformal coatings * Solders * Solvents * Plating * Metallurgy * Apply and interpret state-of-the-art analytical and design tools, such as: * Thermal analysis * Structural analysis * Design of experiments * Finite element analysis * SEM * Auger * CAD/CAM * Possess and apply mechanical aptitude and mechanical design capabilities to tasks such as: * Fixture design and development * Develop and execute IR&D and qualification plans for manufacturing materials and processes * Develop and execute continuous improvement plans for both cost and reliability * Lead design and assembly teams in design for manufacturing, Six Sigma processes, throughput and quality requirements * Perform failure analyses and develop corrective action plans for process and mechanical related failures * Also responsible for: * Process documentation and revisions * Material dispositions Experience - ' Education/Experience Requirement: B.S. with a minimum if 5 years experience or M.S. with a minimum of 2 years experience ' Candidate must have strong communication skills and be a 'Team' player ' U.S. citizenship is required. Security clearance may be required. ' Some travel may be required. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Manager Production I Production management experience preferably in medium to high volume electronics. Will manage a group of over 20 people on three shifts. Ability to maintain consistent output of high quality products in a challenging product area is essential. Experience - Bachelor's Degree plus 4 years experience. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Engineer - Manufacturing / Production Job Duties ' Lead yield improvement efforts on short range sensor and ARS200. ' Oversee troubleshooting of production failures ' Participate in design for manufacturing efforts for new products specifically the SiGe short range sensor Experience - Desired Experience/Skills: 5+ years RF/microwave experience Minimum Requirements: BSEE plus related work experience. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/11/2007 Aircraft Manufacturing Engineer The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Manufacturing Engineer investigates solutions to engineering and production problems of limited scope and impact. He/she documents manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she uses process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she performs trade and cost studies and assists in leading integrated product and process teams. Company Name: Dusek Network Inc. Apply for this Position
01/11/2007 Aircraft Manufacturing Engineering Manager The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Manufacturing Engineering Manager leads the team of engineers to investigate solutions to engineering and production problems of limited scope and impact. He/she leads and establishes the processes to document manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she provides quidance for process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she manages trade and cost studies and assists in leading integrated product and process teams. Company Name: Dusek Network Inc. Apply for this Position
01/05/2007 Technical Purchasing Agent The successful candidate MUST have a bachelor’s degree in an Engineering discipline from an accredited educational institution. Prefer at least five years purchasing experience in a manufacturing environment. Special knowledge/skills required: knowledge of business principles such as purchasing; knowledge of Federal Acquisition Regulations; excellent written and oral communication skills; ability to organize and prioritize multiple work assignments and work with little supervision; experience in CPSR audits preferred; familiar with Small Business reporting preferred. The successful candidate must have experience preparing bid packages, analyzing and evaluating proposals, negotiating subcontract provisions and writing statements of work and terms and conditions for the procurement of specialized materials, equipment and services. The successful candidate must be able to evaluate engineering requirements and evaluate supplier capabilities and monitor supplier schedules to assure successful completion to purchase order requirements. Company Profile: For over 20 years, L-3 Display Systems has been selling well-engineered products. Backed by powerful parent company, L-3 Communications, we're a small division that's big on brilliant ideas for highly engineered rugged display systems for military and commercial platforms. Company Name: L-3 Communications Display Systems Apply for this Position
11/10/2006 Product Engineer Description Responsible for product design and validation, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test and production personnel in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Analyzes and specifies equipment to establish solutions to complex problems. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports for customers, colleagues and management. Qualifications/Competencies: Knowledge and experience of microwave (5-26.5 GHz) and/or millimeter wave (26.5-50 GHz) products and technologies Knowledge and experience of cascaded RF chain design including: Gain Amplitude and phase flatness Noise power Intermodulation, spectral re-growth and noise power distortion Phase noise Spurious Temperature and vibration induced issues Knowledge and experience with: Specifying microwave components Microwave/millimeter wave component vendors Isolators, Filters, Waveguide Assemblies, Solid State Amplifiers, Linearizers, Cables etc Knowledge and experience with: Phase noise AM/AM & AM/PM Phase matching Knowledge and experience of devices including: Power Amplifiers (25 watts) Frequency converters (up and down) Low noise and medium power solid state amplifiers PIN diode attenuators Pre-distortion Filters Mixers Couplers Power combiners Power dividers Waveguide components and transitions Knowledge and experience of mechanical packaging Knowledge and experience digital and analog control systems Knowledge and experience of power supplies Strong knowledge and experience of root cause identification Knowledge and experience with MIL-STD requirements and testing Company Name: Xicom Technology Apply for this Position
11/10/2006 Manufacturing Engineer Provide technical support to the manufacturing production lines building Traveling Wave Tube Amplifier (TWTA), Klystron Power Amplifier (KPA) and Solid State Power Amplifier (SSPA) products. Support will include specifying state of the art manufacturing processes, optimizing existing manufacturing processes, optimizing existing designs, specifying new designs, creating bills of materials for new products, generating ECOs for new and existing products, root cause analysis of production issues and implementation of corrective action. Essential Duties & Responsibilities: Design and introduction of derivative products into production Day to day disposition of discrepant material Hands on troubleshooting of manufacturing issues Creating rework instructions Addressing Engineering change requests Writing Engineering Change orders Implementing lead free solder into the manufacturing process Specifying and testing packaging material Training operators on the operation of the vibration system Testing new and existing products for vibration Specifying high voltage potting materials and processes. Specifying and evaluating fan and blower assemblies. Computer Skills and/or Tools: MS Office, FED EX shipping software and UPS shipping software Qualifications/Competencies: Applicant must have a strong hands on mechanical background, ability to work well with production personnel, enthusiastic with documenting designs and processes, and working knowledge of RF test and troubleshooting Education and/or Experience: 4 Years of relevant experience. BSME or equivalent technical background. Experience with Microwave test. Specifying crimp and solder connections. Experience with high voltage a plus. Experience performing airflow measurements and troubleshooting vibration issues using a shaker table. Company Name: Xicom Technology Apply for this Position
11/8/2006 Aircraft VP of Manufacturing The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. Our Client has an immediate opening for a Vice President of Manufacturing. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program. The Vice President of Manufactuuring will participate as a member of the Executive team developing the strategies and operations of the business and will report directly to the Chief Executive Officer. The qualified individual will possess a B.A. in Engineering with 10 years plus of progressive management responsibilities. Company Name: Dusek Network Inc. Apply for this Position
11/8/2006 Aircraft Vice President of Engineering The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. Our Client has an immediate opening for a Vice President of Engineering. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program. Company Name: Dusek Network Inc. Apply for this Position
11/6/2006 Manufacturing Process Candidate must have proven track record of managing technical semiconductor staff and managing to product line demands. Experience with both silicon and GaAs required; may consider strong candidate with experience in either. Strong understanding and track record of managing to Operational goals and statistical / yield improvements essential. This position is a KEY contributor position with high visibility Require 10 years minimum of Operations management experience, particularly in a semiconductor fabrication facility. Candidate must be degreed engineer (electrical or chemical) at bachelors level minimum. MBA and/or masters level candidate preferred. Company Name: Defense Talent Network Exe Search Apply for this Position
11/6/2006 Production Manager Our client is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries Production management experience preferably in medium to high volume electronics. Will manage a group of over 20 people on three shifts. Ability to maintain consistent output of high quality products in a challenging product area is essential. This Hi-Rel sophiscated line of advanced microwave/electronic circuits, assemblies and sub-system packages require experience with like products. Bachelors Degree plus 4 years experience. Company Name: Defense Talent Network Exe Search Apply for this Position
10/19/2006 PROCESS ENGINEERING TECH Our client is a technology-driven global market leader in a vast array of control products and systems. We currently have an immediate need for an entry level Process Engineering Tech position at our PA based Systems Business. The candidate we are looking for will provide engineering support to Product and Process Engineers by conducting product/process experimentation measurements, coordinating data collections, and analysis report coordination. The candidate should posses the ability to assist line operators in understanding production parameters; assists Process Engineer in reviewing and improving production by evaluating production lot anomalies and customer returns and recommending remedial and/or corrective solutions. The candidate will assist Product/Process Engineer’s in the development of new processes and improving existing operations. Position qualifications · Associate/Specialized Tech Degree; in any engineering science · Auto CAD exposure · Industrial Manufacturing exposure · Good Mechanical Aptitude · Electronics exposure a plus Company Name: Defense Talent Network Exe Search Apply for this Position
10/19/2006 Process Engineer (PH-001) Process Engineer: Coordinates manufacturing activities with Design Engineering, Manufacturing and Quality Assurance to ensure product meets customer expectations and that processes undergo continual improvement. Areas of Responsibility: Plans for work flow within the production environment to reduce wasted effort. Clarifies and assists production personnel in understanding manufacturing parameters: answers questions and interprets work performed in travel tickets and test plans, prepares travel tickets, and trains operators in the use of new equipment. Reviews and improves production by continuously monitoring and evaluating production methods, analyzing production lot failures and customer returns and recommending remedial and/or corrective solutions. Communicates with staff: performs and reports failure analysis results to production supervisor, QA and Engineering Manager; assists QA and other departments in dealing with customer questions and problems. Develops processes for new products as they are being designed, and documents the process or procedures. Education/Experience: 5{PLS} years of experience working in an electronics-manufacturing environment, preferably with products for military applications. Familiar with hybrid and discrete electronics manufacturing processes such as wire bonding and soldering. B.S in engineering, physics or other related scientific discipline preferred. Strong ability to work with others on an individual basis or team environment. Company Name: Defense Talent Network Exe Search Apply for this Position
10/19/2006 Quality Manager Individual has total responsibility for leading, strengthening and driving all aspects of the Quality Culture for the Microwave Operation. That responsibility includes meeting customer requirements, driving cultural change that will improve all key measurements and develop suppliers for improved quality. The individual will be responsible to revolutionize quality systems and culture to strengthen our ability to compete in the future and elevate the operation to a market leader. Areas of Responsibility: Create and serve as key change agent in providing a culture that motivates, challenges and attracts all employees to participate in the continuous improvement initiatives. Leads and mentors the organization in developing a philosophy constancy of purpose and guiding principles concerning quality management and continuous improvement. Serves as ISO Quality Management Representative. Establishes and maintains an internal auditing team that monitors current systems and identifies opportunities for improvement. Evaluates training needs and identifies resources. Drives quality system improvement by review of SPC, internal audit results, corrective action responses, CI team progress, and customer report cards. Responsible for calibration of test and measurement equipment. Drives corrective action responsiveness for timely and accurate root cause analysis and permanent corrective action. Special Knowledge: Previous experience with the implementation of an ISO-9001:2000 quality operating system. Proficient in Excel and Access database systems; the working tools to effect: quality systems and techniques, process control – including SPC; strong investigative and analytical skills –technical aptitude; interpersonal skills; verbal and written communication skills and excellent presentation skills; supervisory and organizational skills. Company Name: Defense Talent Network Exe Search Apply for this Position
9/14/2006 Design Assurance Strategy and Execution Leader This role is within Performance Excellence (PE) Design Assurance representing the customer's best interests, ensuring No Doubt Mission Assurance for the warfighter throughout the product life cycle from design to post delivery support. In this role, the Performance Excellence Design Assurance Strategy and Execution Lead is responsible for identifying opportunities for improvement in PE processes and for driving the improvements in programs throughout IDS. Successful deployment of these processes will help to ensure programs meet customer / end user objectives for Mission Assurance and ensure No Doubt expectations. This PE Leader will work closely with the customer, other IDS Cross Business Teams (CBTs) such as Engineering, Operations and Supply Chain, and other PE functions to improve all PE business processes. This individual will drive a Results Based culture using analytical methods for process improvement, making decisions to support our business and the warfighter while executing at Ramp Speed. Required Skills : - Experience in a Lead or Program Management position with strong leadership and good business acumen JOB REQUIREMENTS: - Knowledge of statistical – based methods of data analysis, including statistical process control - Subject matter expertise in one or more of the following areas: systems engineering , hardware engineering, software engineering, test and integration - Knowledge of quality systems and concepts including strong root cause analysis - Ability to interact with and influence top-level IDS Leaders - Independent, high energy team player who is results- oriented - General knowledge of aerospace /defense products and standards - Knowledge of Six Sigma, Lean and/or other contemporary methodologies for process improvement - Good general knowledge of industry technical standards (such as ANSI, CMMI, ASTM, etc). - Good written & verbal communication and presentation skills. Desired Skills : - Experience in Manufacturing , Engineering and / or Supply Chain. - Business degree , certifications and / or relevant experience - ASQ Certifications (CQE, CQM/OE, CSQE, CQA, CRE, etc.), Lean/Six Sigma or other contemporary methodologies and tools for continuous improvement. - Certified Program Manager (PMI Certification). - Familiarity with general ISO/AS 9100 Quality requirements Required Education (including Major): Minimum of 10 years participating in design and development activities with a BS/ BA in Engineering, Science or Mathematics. MBA and / or MS Engineering / Science desired. Company Name: Raytheon Apply for this Position
9/12/2006 RF Microwave Production Test Technician Job Responsibilities: • Test, tune, align, troubleshoot and repair RF components and/or sub assys • Ensures product specifications are accurate • Reviews specifications and parts lists when new orders are received • Interfaces with assemblers regarding parts availability • Sets up test procedures • Typically identifies problems restricting manufacturing throughout and recommends solutions • May train other technicians • May perform design tests for engineering • Analyze field failures and recommend corrective actions as required • Ensure that components meet production specification * Works from schematics, diagrams, written and verbal descriptions, layouts and defined plans to perform testing checkout trouble-shooting functions Qualifications: • US citizenship or permanent residency is required • Dynamic Personality, Motivated and Driving attitude • Requires HS diploma or equivalent; prefer AS degree in Electrical Engineering or equivalent training • RF Technician experience is required • Understanding of RF, DC and electronics theory • Five (5) plus years applicable work experience • Requires good hand-eye coordination working under microscopes • Prefer familiarity with assembly techniques Equipment, Systems, and Software Operated: Signal Generator, Hi-power Microscope/s, Scalar/ Network Analyzer, AC/DC Power Supply, Spectrum Analyzer, Noise Figure Meter & Source Diode, Multi-meter and Power Meter Company Name: Endwave Apply for this Position
9/7/2006 SAP Production Planning (PP) Analyst-AZ The SAP Competency Center within Raytheon Corporate IT has an immediate opening for an SAP Business Process Analyst reporting directly to the Solution Architect & Technical Integration Manager . This individual will be responsible for supporting key business processes which include: - Analysis within the Production Planning Module and the Quality Management Module. - Perform and test R/3 customizing/configuration to address new business requirements as identified - Perform detailed requirements gathering/documentation, and functional testing in support of new ABAP development tasks Candidate expected to provide sustaining support to a broad and dispersed customer base in key business process areas which mainly includes the manufacturing life cycle throughout Raytheon Missile Systems. Expected to work directly with program-area Business Managers; planners, schedulers, technical programmers, business end users and other functional team members to resolve and close out problems and/or deliver new functionality. Candidate expected to participate on a wide array of both short-term and long-term challenges, which include other initiatives such as archiving, new business unit deployments and implementation of new SAP tools, for example, GTS (Global Trade Services Module) and AII (Auto Identification Infrastructure). Please be aware that this is a functional role that requires a strong analyst background. This is not a technical or development position. This position is Tucson, AZ. Company Name: Raytheon Apply for this Position
8/30/2006 Sr. RF/Microwave Modular Subsystem Engineer Position Summary: Position will be manufacturing support for thin-film RF/Microwave modular subsystems. Role will support the product line by resolving technical issues relating to the testing and tuning of hardware. These issues must be resolved while maintaining a regular production flow. General computing skills and organization will be needed to document formal changes to hardware by updating AutoCAD drawings and BOMs. Position will participate in cost reduction initiatives such as Six Sigma and Lean. US Citizenship and the ability to obtain a DOD security clearance is required. A BS in electrical, mechanical, or a related field and 5+ yrs of applicable experience is required. Company Name: ProfessionalEXEC Recruiters Apply for this Position
9/2/2006 RF Engineer Primary responsibilities: • Design and development of novel resonant cavity structures and circuits including EM simulation and optimization. • Working with a cross functional team to develop RF/Microwave circuits to drive electrodeless lamp systems. • Assist applications engineering in the integration of light sources into Televisions. • Will assist manufacturing in the development of processes for building RF Electrodeless lamps. Required skills and experience: • A solid understanding of RF/Microwave circuit fundamentals. • A good understanding of Electromagnetic theory. • A familiarity with general RF test equipment. • Experience with CAD tools such as Microwave Office or ADS as well as electromagnetic simulation tools such as HFSS or Sonnet. • Knowledge of EMI reduction and FCC testing a plus • Knowledge of resonant structures including dielectric resonant cavities a plus • Effective verbal and written communications and interpersonal skills. Required education: • MSEE or equivalent, with 0-5 years relevant experience. Company Name: Luxim Corporation Apply for this Position
8/21/2006 Tool Maker/Builder/Designer Our client is in need of experienced aircraft tooling, jig and fixturing design and build personnel. The ideal candidate would be UG NX3 capable, with 10 years of Soft- and Hard-Tooling Design and Build experience in the aircraft manufacturing environment. Vision alignment and inspection experience is also highly desirable. This company requires individuals who can immediately join the team and contribute to the success of the company. Company Name: Dusek Network Inc. Apply for this Position
8/18/2006 Manufacturing Engineer I Manufacturing Engineer (ME) responsible for all aspects of development, documentation, and support manufacturing process from conceptualization through production sustaining activities. Required Skills: Knowledge and experience in production processes and standards associated with electro-mechanical systems in a defense environment. Strong problem solving capabilities and computer skills. New product development requirements will include participation in integrated product development proposal generation. MEs will perform and/or oversee engineering activities required for manufacturing implementation of electro-mechanical assemblies including: tooling design and fabrication, process development validation, development of methods and procedures to improve and maintain quality standards and manufactured products, and production support through 1st article build. Sustaining MEs will support operations through problem identification and resolution, training and certification of production personnel, process monitoring and improvement through statistical analysis of data, and implementation of innovative approach to reduce the overall cost of products through increased productivity and reduced rework and scrap. Company Name: Raytheon Apply for this Position
8/17/2006 Manufacturing Engineer Req # 1331 Develop and implement manufacturing processes suitable for automation and statistical process control. Plan sequence of operations and specify procedures for the manufacture of electro-mechanical parts and assemblies. Provide guidance to engineering regarding design concepts and specifications requirements to best utilize current equipment and manufacturing techniques. Monitor performance of machinery, equipment and tools to verify their efficiency and investigate and intimate corrective action of problems and deficiencies to ensure product quality. Design and plan layout for activities such as cable & harness, laser cutting, metal forming, and electro-mechanical assemblies. Develop and implement lean manufacturing and continuous process improvement principles. Minimum of five years recent experience in applicable process technologies. Lean Thinking expertise is desirable. Engineering degree is required. Current Secret Clearance required. Company Name: Northrop Grumman Apply for this Position
8/5/2006 Textile Engineer Provide technical expertise relating to the design, testing, and manufacturing of clothing and individual equipment for the US Army. Essential Job Functions: Prepare, document, and deliver written and oral presentations in support of textile designe and manufacturing projects. Prepare technical assessments and supporting documentation IAW DoD 5000 and DA regulations. Perform analysis and assessments and make recommendations as part of an Integrated Product Team (IPT) consisting of Government, supporting and prime contractor personnel. Company Name: DCS Corporation Apply for this Position
8/5/2006 Quality Assurance Specialist Provide on-site QA/QC support to Government product manager responsible for development, integration, test, production, and fielding of individual soldier clothing and equipment. Essential Job Functions: Interface directly with multiple Government agencies and prime vendors in development and production of clothing and individual equipment. Plan, coordinate, and provide oversight in QA/QC aspects of clothing and individual soldier equipment. Perform analysis and assessments and make recommendations as part of an Integrated Product Team Prepare, document, and deliver written and oral presentations in support of projects. Prepare program plans and supporting documentation IAW DoD 5000 series and DA regulations Company Name: DCS Corporation Apply for this Position
8/5/2006 Manufacturing Engineer (CNC machining ) Seeking a Manufacturing Engineer with strong background and experience in CNC machining (multi-axis milling and turning), welding/brazing, metal fabrication, metal finishing and related processes. Responsibilities: Process improvement/development to state-of the art levels Product quality Selection and development of outside suppliers implementation and support of a responsive quotation process. Requirements: 7-10 years related experience in a machining, metal fabrication environment. Engineering/technical bachelor’s degree preferred. Experience in a JIT, lean manufacturing environment is a plus. Company Name: The Couture Group, Inc. Apply for this Position
7/27/2006 Manufacturing Engineer II/III Manufacturing engineer to interface with engineering during the design phase of a program to insure operations can produce product as designed and accordance to cost. Participate as operations representative on the Configuration Control Board to review and approve drawings prior to their release for production. Prepare labor estimates for new proposals based on conceptual designs and preliminary engineering outlines. Write detailed work instruction planning for electrical fabrication, assembly and installation. Participate in make or buy decisions regarding electrical parts and assemblies. Provide advice and assistance to production shops to insure parts are manufactured to the best available practices. Perform other duties as required. Company Name: BAE Systems Apply for this Position
7/27/2006 Operations Manager Defense and Space is seeking an Operations Manager who will be responsible for directing activities of engineering operations. Will be responsible for scheduling work flow to meet development and production schedules, interfacing with design engineers and program management and resolving technical and scheduling issues. Company Name: NewTech Executive Search Apply for this Position
7/27/2006 Plant Manager Aircraft This position, Factory Manager, UAV ROR, has the responsibility of managing all resouces under the span of control in order to effectively serve the ROR customer base. Specific duties in running the day to day operation of the factory include the attainment of cost, schedule, budgetary and quality goals. Provides the proper staffing of the factory to include: interviewing, selection and training of all subordinates to work to approved procedures and work instructions. Represents the UAV ROR Factory at various program and Operations meetings. Balances finite resources with dynamic levels of varying demands from internal & external customers. Must utilize lean manufacturing principles for efficiency, throughput and timely response to ROR requirements. Company Name: NewTech Executive Search Apply for this Position
7/27/2006 IPT Lead - Receiver/Exciter Products This IPT lead position is responsible for leading a multi-disciplined team involved in the design, and manufacturing/test of Receiver/Exciter sub-systems. Required skills include: Ability to employ standard Program Engineering tools/templates to manage cost, schedule and design performance on RF sub-systems, Ability to interact with team members to achieve consensus decision making, establish objectives, define specific roles and responsibilities, establish action plans to resolve time-critical issues. Interface w/ functional managers to establish resource plans and manage WBS allocations.Possess effective oral and written communication skills. BS in engineering, physics, or mathematics. 3 years experience as an ES product/process IPT member, or 1 year of experience as an IPT lead, or 1 year experience as a program manager. General knowledge of design/manufacturing, project leadership skills, and ES program disciplines including design, product cell assembly, materials management, test, quality assurance, and program management. MULTIPLE POSITIONS. Some relocation assistance may be available. Security Clearance Required Company Name: Northrop Grumman Elec. Sys. Apply for this Position
7/27/2006 Engineer Carbon Fiber Process development, design and producibility review, prototyping, and tool design of composite parts and assemblies. Utilization of CAD tools in the performance of job duties. Manufacturing and fabrication shop floor support. Skills & Qualifications: 3 years exp & Bachelors Degree in Engineering, Manufacturing Engineering, Physics, or equivalent education. Demonstrated experience in the development of Engineering designs, fabrication process (including tool design), and/ or support of fabrication activities related to composite structures to include, but not limited to, carbon fiber or fiberglass materials. Specific knowledge related to Thermoset and thermoplastic composite materials, autoclave, hot press and over cure processes, pre-preg fabrication processes is preferred. General experience with related composite materials and/ or processes also preferred. Company Name: NewTech Executive Search Apply for this Position
7/27/2006 Manufacturing Engineer Support the manufacturing and continuous improvement of multi-function microwave and RF subsystem designs including up/down converters, synthesized sources, and MIC based tuners. Applications include missile front ends, radar receivers, microwave and millimeter wave radios, communication transceivers and synthesized sources. Work with Engineers, Technicians, Assemblers and support groups to solve microwave integrated circuit production problems to ensure shipping goals are met. Participate in product cost reduction studies. Perform yield analysis, design enhancements, and qualify product changes in support of cost reduction goals. Work as a member of new product introduction teams to transition to manufacturing microwave and RF subsystem designs. A BSEE and 5+ yrs (or MSEE and 2+ years) directly applicable experience is required. Design experience with microwave and/or RF circuits is preferred. Possess a high knowledge and hands on experience with microwave circuits including amplifiers, filters, frequency multipliers, high power limiters, oscillators, switches, and mixers. Requires knowledge of CAD tools as well as microstrip circuit design and layout. US citizenship is required and the ability to obtain US DOD Security Clearance is required Company Name: NewTech Executive Search Apply for this Position
7/23/2006 CNC Machinist/Set-up Support the manufacturing and continuous improvement of multi-function microwave and RF subsystem designs including up/down converters, synthesized sources, and MIC based tuners. Applications include missile front ends, radar receivers, microwave and millimeter wave radios, communication transceivers and synthesized sources. Work with Engineers, Technicians, Assemblers and support groups to solve microwave integrated circuit production problems to ensure shipping goals are met. Participate in product cost reduction studies. Perform yield analysis, design enhancements, and qualify product changes in support of cost reduction goals. Work as a member of new product introduction teams to transition to manufacturing microwave and RF subsystem designs. A BSEE and 5+ yrs (or MSEE and 2+ years) directly applicable experience is required. Design experience with microwave and/or RF circuits is preferred. Possess a high knowledge and hands on experience with microwave circuits including amplifiers, filters, frequency multipliers, high power limiters, oscillators, switches, and mixers. Requires knowledge of CAD tools as well as microstrip circuit design and layout. US citizenship is required and the ability to obtain US DOD Security Clearance is required Company Name: Micro-Coax Apply for this Position
7/23/2006 Antenna Specialist Support the manufacturing and continuous improvement of multi-function microwave and RF subsystem designs including up/down converters, synthesized sources, and MIC based tuners. Applications include missile front ends, radar receivers, microwave and millimeter wave radios, communication transceivers and synthesized sources. Work with Engineers, Technicians, Assemblers and support groups to solve microwave integrated circuit production problems to ensure shipping goals are met. Participate in product cost reduction studies. Perform yield analysis, design enhancements, and qualify product changes in support of cost reduction goals. Work as a member of new product introduction teams to transition to manufacturing microwave and RF subsystem designs. A BSEE and 5+ yrs (or MSEE and 2+ years) directly applicable experience is required. Design experience with microwave and/or RF circuits is preferred. Possess a high knowledge and hands on experience with microwave circuits including amplifiers, filters, frequency multipliers, high power limiters, oscillators, switches, and mixers. Requires knowledge of CAD tools as well as microstrip circuit design and layout. US citizenship is required and the ability to obtain US DOD Security Clearance is required Company Name: BAE Systems Apply for this Position
7/21/2006 Senior Process/Production Specialist (ME) 1. Responsible for the development of the total manufacturing and/or quality plan of assigned components. Utilizes assigned product engineers/specialists to meet planning, tooling and other requirements. 2. Provide lead technical support of assigned components. Involved with solving manufacturing and/or quality problems with effective root cause corrective actions on identified problems. 3. Leads cost reduction efforts in assigned areas utilizing appropriate personnel. Tracks progress and prepares required reports. 4. Actively work with design engineering to represent QTP organization in establishing producible parts meeting customer and quality requirements at minimum cost 5. Recommend and/or process design/process changes including cost, delivery, quality, and effect data. Insures change in design/process are properly imlemented. Company Name: GE Aircraft Engines Apply for this Position
7/21/2006 Process Engineer • Must be technically knowledgeable in manufacturing methods and techniques with prior work experience in problem solving of manufacturing processes • Design and develop manufacturing processes • Implement process improvements to increase productivity. • Investigate problems in manufacturing of a processing nature and provides solutions. • Follow-up on engineering change notice after completion to verify implementation and effectiveness including design and process related issues • Participates and provides support to material review board in determining causes • Procedure writing ability • Develop and implement statistical methods • Apply problem solving techniques, i.e. DOE • BS or better in related engineering discipline, i.e. electrical or manufacturing and 5 years work experience. Company Name: Mini Circuits Apply for this Position
7/21/2006 Assembly Fitter Responsible for assembly and integration of M777 Lightweight 155mm Howitzers according to schedule and in compliance with BAE Systems RO Defense Inc manufacturing operating instructions. Produce a quality product which fulfills the highest quality standards for delivery to the US Department of Defense customer. Key Tasks Assembly of M777 155mm lightweight Howitzer Follow quality control and test procedures for Howitzer assembly Installation and verification of fire control equipment Support mobility testing Interpret engineering plans, drawings, and operating instructions * Sound mechanical background * Assembly experience * Flexibility to adopt constant improvement work practices * Ability to work in a team environment * Ability to work precisely with metric and imperial measuring systems * Computer literacy * Fundamental math skills * Proven stable work history * Willingness to learn and follow procedures * Must pass NAC background investigation * Must be willing to work night shift Company Name: BAE Systems Apply for this Position
7/20/2006 Airborne Production Manager Execute commitments of product line for deliveries, cost and quality Ensure process integrity Performance goal compliance Capacity requirements Customer interface as required Make work assignments Provide leadership and coaching to work team Participate in continuous improvement teams Develop operator certification requirements Skill enhancements of work team Meeting priority commitments Labor administration requirements Adherence to policy and procedures Movement to self directed work teams Company Name: EFW Inc Apply for this Position
7/19/2006 Engineer/Scientist, Process Engineering Tasks include providing engineering technical support to aircraft structural components manufacturer in performing manufacturing of high speed rotating machinery. Individual will assume a lead role in working with experienced engineers in an Integrated Product Team environment to develop new manufacturing processes, methods and tools. Individual will interact with a variety of organizations and partners in this effort. The candidate will be responsible for process definition, implementation of manufacturing processes and technology, helping to define lean manufacturing processes and developing improvements to existing manufacturing process methods. Additional tasks include developing solutions to complex manufacturing problems which require ingenuity and innovation. Communicating with customers, teaming partners, subcontractors, and suppliers will be required. Required Skills: Applicant should possess knowledge of engineering principles, advanced mathematics, process development and modeling, computing skills and standard office computing applications. Knowledge of manufacturing processes, as well as a willingness to take a hands-on approach in working with shop floor personnel is needed. In addition, the ability to think logically and apply technical reasoning to the solution of manufacturing problems is required. This position requires creative analytical and problem solving skills n a manufacturing environment. Applicant should be self-motivated and must be able to interface with other members of manufacturing projects or project teams, management, and technical staff to define and implement engineering solutions to meet assigned objectives. A proactive, results-oriented person capable of cooperating with many different people to accomplish tasks is desired. Applicant should possess strong verbal and presentation skills, along with a good balance of technical and people skills. Company Name: The Boeing Company Apply for this Position
7/16/2006 Production Planner – Microwave Systems Looking for a Production Planner to manage production workflow, generate and prepare scheduling and planning reports, and effectively communicate within the organization. Additionally, the planner supports the Program Office and is assigned to specific Program Managers, therefore the candidate must be able to manage multiple programs, from a manufacturing and materials perspective, and have specific program status at all times. Candidates must have at least 5 years of experience in a manufacturing environment with a thorough knowledge of MRP systems, understanding of business operating systems, a proven ability to meet deadlines and a Bachelor’s degree. APICS certification is desired. The candidate must have experience in a low volume custom environment with a high product mix and possess the ability to read engineering drawings. Responsibilities will include managing work order releases and completion, capacity planning, workflow analysis, ECO implementation, scheduling of Sales Orders and work order releases to meet customer expectations, and generating various status reports. Candidate must be proficient in MS Office software (Word, Excel, Project). Working knowledge of Microsoft Access is desired. Bachelor’s Degree 5 years planning experience in an OEM manufacturing environment Familiar with MRP systems Proficient with the MS Office suite APICS Certification desired Company Name: Dusek Network Inc. Apply for this Position
7/15/2006 Electronics Test Technician Responsible for performing functions associated with all manufacturing test operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, circuit boards and completed final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment. Determines and may assist in developing methods and procedures to control or modify the manufacturing test process. Company Name: Dusek Network Inc. Apply for this Position
7/15/2006 Operations Engineer, Applications/Methods Develop manufacturing process models utilizing Pro-Model software, support methods and process databases development utilizing Microsoft Access and other standard software packages. Promote detailed methods and techniques necessary to optimize manufacturing processes. Support development of new methods and processes. Product Review information and feedback to internal customers and staff leaders. Responsible for production planning and associated product implementation activities. Company Name: BAE Systems Apply for this Position
8/5/2006 Munitions Explosive Manufacturing Ordnance OBJECTIVES: · Oversee all manufacturing activities in the Casper, WY location. · Achieve optimum labor, overhead and raw material costs for the size of the business/ level of activity. · Direct activities so that approved products are manufactured on scheduled and at a high level of safety and quality standards. · Ensure inventory and shipping/receiving functions are operating at levels that meet customers needs and established financial benchmarks. · Coordinate with Research & Development department to identify initiatives to increase scalability of mass produced items. MINIMUM REQUIREMENTS: · Bachelor’s degree in Engineering. · Experience leading a manufacturing organization · Experience managing a significant segment of a large manufacturer or the entire operation of a smaller manufacturer. · Experience in the ammunition, explosives or related defense manufacturing industries. · Experience working with lean manufacturing based technology. Company Name: JobPlex Apply for this Position
6/3/2006 Manufacturing Engineer (CNC machining ) Seeking a Manufacturing Engineer with strong background and experience in CNC machining (multi-axis milling and turning), welding/brazing, metal fabrication, metal finishing and related processes. Company Name: The Couture Group, Inc. Apply for this Position
6/3/2006 Manufacturing Engineer -Substrate assemblies, wire bonding, die attach, PWB assemblies and higher level RF assemblies, epoxies, solders, sputtering, metallization, machining, material analysis, chemical analysis and failure analysis. -Develop manufacturing documentation, tooling and fixtures for high reliability space and military products. -Provide technical support to customers and suppliers. Company Name: The Couture Group, Inc. Apply for this Position
5/31/2006 INDUSTRIAL ENGINEER I This position will be responsible for providing info. and analysis required by operations management to make sound manufact. decisions. Capacity analysis, product. report., factory level scheduling and dispatching, and general decision support for wafer fab operations Perform time studies, summarize process time requirements, calculate equipment capacity under various product mix scenarios Assist in justification of capital equipment. Provide reports and analysis for manufacturing supervisors to manage bottleneck production areas Develop and implement factory floor dispatch rules and equipment utilization policies. Company Name: ProfessionalEXEC Recruiters Apply for this Position
5/19/2006 Design Engineer-QA, Manufacturing * Management of Quality Engineers and Quality Review personnel. * Strategic quality escape reduction planning and implementation, rework/scrap reduction, audit functions, and shop interface for quality related issues. * Continual monitoring of metrics to ensure compliance. * Supervisory responsibility for 7 quality engineering personnel and Quality Review supervisor. * Active participation and leadership of respective ACE teams, working in conjunction with all ACE initiatives and tools. * Position includes interface with the operations management team. * Superior knowledge of quality practice and procedures coupled with outstanding communication and leadership skill. Company Name: RMS, Inc. Apply for this Position
5/19/2006 Manufacturing Engr-Bonded & Machined Vanes * Join a high caliber manufacturing team that is tackling production opportunities related to the Inlet Bonded Vanes. * Provide shop floor support by problem solving, establishing new processes, and satisfying process certification requirements. * Conduct root cause investigations and implement corrective actions in problem areas. * Coordinate tooling changes in an effort to resolve quality issues. * Assist in development of standard work, operator instructions and participate in cost reduction efforts. * Support Quality and Environmental Health & Safety (EH&S) initiatives as you actively drive change towards lean Company Name: RMS, Inc. Apply for this Position
5/13/2006 Production Reliability Engineer This individual will analyze product failures for root causes, propose corrective actions, prepare failure and analysis report and maintain reliability control database on product success/failure history. The candidate will utilize statistical methods such as linear regression and standard deviation to evaluate compliance with reliability numerical requirements. This individual will participate in production review for mature products. This includes reviewing engineering change proposals affecting product baseline data. Additionally, this person will review manufacturer's failure analysis and corrective action for product compliance. Note: This position will be tailored for a recent college graduate who has an applicable degree and related co-op or internship experience in a manufacturing environment. Final job title and grade will be commensurate with experience. * Baccalaureate degree in EE, ECE or similar engineering discipline. * Knowledge in Visual Basic, Excel, Power Point and Word * Knowledge in SQL and Crystal Reports * Knowledge in Access and other related databases * 4+ years related work experience in Reliability Engineering and failure analysis for DoD military electronics products. Company Name: BAE Systems Apply for this Position
5/12/2006 Manufacturing Engineer II/III Manufacturing engineer to interface with engineering during the design phase of a program to insure operations can produce product as designed and accordance to cost. Participate as operations representative on the Configuration Control Board to review and approve drawings prior to their release for production. Prepare labor estimates for new proposals based on conceptual designs and preliminary engineering outlines. Write detailed work instruction planning for electrical fabrication, assembly and installation. Participate in make or buy decisions regarding electrical parts and assemblies. Provide advice and assistance to production shops to insure parts are manufactured to the best available practices. Perform other duties as required. Company Name: BAE Systems Apply for this Position
5/8/2006 NC Programmer Apply knowledge of engineering data, geometric dimensioning and tolerancing (GD&T), and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, producing multiple types of inspection media (e.g. for Coordinate Measuring Machines and Mylar inspection media). Ability to create and/or validate machine-control data, inspection point coordinate data and documentation. Company Name: Ian Martin Apply for this Position
4/30/2006 Manufacturing Engineer Support the manufacturing and continuous improvement of multi-function microwave and RF subsystem designs including up/down converters, synthesized sources, and MIC based tuners. Applications include missile front ends, radar receivers, microwave and millimeter wave radios, communication transceivers and synthesized sources. Work with Engineers, Technicians, Assemblers and support groups to solve microwave integrated circuit production problems to ensure shipping goals are met. Participate in product cost reduction studies. Perform yield analysis, design enhancements, and qualify product changes in support of cost reduction goals. Work as a member of new product introduction teams to transition to manufacturing microwave and RF subsystem designs. A BSEE and 5+ yrs (or MSEE and 2+ years) directly applicable experience is required. Company Name: NewTech Executive Search Apply for this Position
4/30/2006 Manufacturing Test Engineer The position is responsible for providing test engineering support for San Diego manufacturing operations. Primary responsibility is to assist in releasing new production test solutions and sustaining and improving existing test solutions. Candidate will monitor yield and work on yield enhancement and test time reduction activities. The candidate will be responsible for: • Bringing up new production test solutions. This will include all activities from initial transfer, and correlation activities to achieving targeted yield. • Providing sustaining engineering support. This will include monitoring and reporting of yields, disposition of the material with low yield and yield enhancement. • Test time reduction. This will include all necessary activity, hardware mod, test program mod and change in test methodology on existing products to improve manufacturing test productivity. • Test program/hardware development assistance: This will include providing assistance to the development eng, minor modifications to test programs or development of new test programs for derivative products. Company Name: Aztec Professional Services Apply for this Position
4/22/2006 Manufacturing/Industrial Engineer This candidate will join the Industrial Engineering department which is responsible for productivity, manufacturing documentation, producibility, transition to manufacturing, manufacturing processes as well as initiatives and teams to improve Operations performance. Initial assignments will support operation involving antenna design, antenna manufacturing (including adhesive processes) and coordinating disposition and repair of electronic hardware. The work environment is fast paced with team members being encouraged to implement system improvements. Note: This position will be tailored for a recent college graduate who has an applicable degree and related co-op or internship experience in a manufacturing environment. Final job title and grade will be commensurate with experience. Company Name:BAE Systems Apply for this Position
aero manufacturing, aerospace engineer, aerospace manufacturing, airbus aircraft, airbus manufacturing, aircraft aerospace, aircraft altitude, aircraft aviation, aircraft avionics, aircraft cabin, aircraft cockpit, aircraft commercial, aircraft composite, aircraft composites, aircraft cost, aircraft engine, aircraft engine manufacturers, aircraft engineering, aircraft engines, aircraft faa, aircraft fuel, aircraft fuselage, aircraft helicopters, aircraft industries, aircraft industry, aircraft interior, aircraft jet engine, aircraft jets, aircraft landing gear, aircraft lockheed, aircraft maintenance, aircraft manufacture, aircraft manufacturer, aircraft manufacturers, acme engineering & manufacturing, acme engineering products, aircraft manufacturers association, Aircraft Manufacturing, aircraft manufacturing companies, aircraft manufacturing industry, aircraft performance, aircraft pilot, aircraft pilots, aircraft plane, aircraft planes, aircraft plans, aircraft propeller, aircraft range, aircraft sales, aircraft seat, aircraft seat manufacturer, aircraft seat manufacturers, aircraft system, aircraft systems, aircraft tail, aircraft takeoff, aircraft transport, aircraft turbine, aircraft twin, aircraft weight, aircraft wing, aircraft wings, airplane aircraft, airplane manufacture, airplane manufacturer, airplane manufacturers, airplane manufacturing, airplanes aircraft, apex engineering products, architectural engineer, audio engineer, automotive engineer, aviation manufacturing, biomedical engineer, boeing aircraft, boeing manufacturing, building engineer, career engineer, careers engineer, cargo aircraft, certified manufacturing engineer, cessna aircraft, chemical engineer, civil engineer, columbia aircraft manufacturing, commercial aircraft manufacturing, commercial manufacturing, composite manufacturing, composites manufacturing, computer engineer, computer science engineer, construction