Electrical Jobs

	Electrical Jobs
11/05/2007 Sr. Electrical Engineer Candidate must have 3+yrs DOD or Aerospace exp. with a BSEE degree. Experience in Analog/Digital design, R/F capabilities, diagnostic analysis of electric circuit boards with FRPG or DSP embedded system test and design.. Ability to provide design concepts/approaches to aide in development of new products. Ensure accuracy and adequacy of designs. Disseminate knowledge and experience as input toward design, blueprinting and procedural,ANSI,FAR.ASO standards. Ability to work with Project and Quality managers on technical writing issues. Familiar with nano pumps and filters that correlate with the EE environment. Test and document all procedures, within the design group. Some supervision of Jr. engineers, light travel, Customer contact. Salary $80-125k DOE, Perks Bonuses, Full family benefits Company Name: Confidential Apply for this Position
11/02/2007 Member Technical Staff (5785A) We are seeking a candidate to joing our team as a Member Technical Staff. This will assist with repair of all items of SINCGARS family of radio systems. FSR services to include, but not limited to, providing operational, maintenance and support for tactical communication equipment in Middle East theatre. Maintenance will be performed utilizing the AN/GRM-122 radio test set and other standard items of maintenance equipment. FSR will be responsible for maintaining equipment, to include hardware and software upgrades for this equipment. ITT Aerospace/Communications Division (ACD) www.acd.itt.com is a world leader in developing wireless networking systems for tactical communications. We are the creator of the core technology used in the world's two largest tactical digitization programs. ACD is a co-creator of the Software Communications Architecture for the Joint Tactical Radio System (JTRS) and is also the provider for America's newest ground to air radios used by the Federal Aviation Administration (FAA). ITT offers a team-oriented, stimulating learning environment in which the veterans learn from the new generation, and gladly provide mentoring. You will find projects that are fascinating where the only limitation is innovation and creativity. Our leadership style is 'people-oriented'. That's one of the many reasons people who come here rarely leave. We are a CMMI Level III organization; that shows our commitment to process excellence. Note that the work is in a small division of less than 2,000 total employees with a historically stable environment. So it has the feel of a small and intimate organization, though it has the powerhouse resources and systems of the 8 billion dollar Fortune 500 Company that we are. Take Flight ' Launch your career with ITT ITT offers an outstanding compensation and benefits package including medical, dental and life insurance, 401(k) with employer match, and a pension plan. In addition, we offer other excellent salaried employee benefits including a relocation assistance, generous number of holidays, vacation days, tuition reimbursement, fitness club assistance and flexible work schedule. Experience: BSEE or Military Technical schooling/ ASEE and four years of experience. 3-5 years in the installation, maintenance and operation of large scale communications and/or electronic systems; some experience in training. Experience with Company systems and products; experience with military communications and/or electronic systems is desired. Experience in formal classroom training and training development is an asset. Broad knowledge of electronic theory, circuitry, mechanics, and assembly techniques. A good knowledge of company and ILS standards, bid estimating procedures and project management skills. Candidate selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. U.S. citizenship required. Company Name: ITT Corporation Apply for this Position
10/26/2007 Antenna Engineer Currently seeking a highly motivated individual to become a part of a dynamic engineering team. This individual will undergo a comprehensive training program enabling them to grow and develop as an Antenna Engineer under the direction of Senior Antenna Engineers. Position responsibilities include: • Designing and developing new products that meet customer specifications. • Providing technical assistance to customers as required. • Preparing proposals including design concepts, quoting, writing sections, and presentations to internal and external customers. Qualified candidates will possess: • Minimum B.S Electrical Engineering • Basic understanding of microwave circuits, • Knowledge of antenna radiation pattern and S parameter testing • Knowledge of Antenna test equipment configuration and operation preferred • Proficient in both MS Office and engineering design applications • The ability to obtain/maintain a secret clearance which requires U.S. citizenship. Company Name: The Couture Group, Inc. Apply for this Position
10/26/2007 Digital Engineer III Company in Defense & Space industry is growing rapidly and requires an experienced leader who can deliver outstanding results for Customers, Employees and Stakeholders. This position will be a Technical Lead for the digital engineers and be responsible for design architecture, proposal writing, assisting with budget cost and scheduling, mentoring, and holding design reviews for multiple programs. Will apply appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as RF and Digital applications. • Design digital hardware in a programmable integrated environment using Very High Speed Integrated Circuit Hardware Description Language (VHDL) for programmable circuits • Design Printed Wiring Boards (PWB) which consist of Analog and/or Digital circuitry • Develop architecture of a field programmable gate array (FPGA) design • Develop system level architectures for subsystem designs • Define architectures. • Integrate a PWB and FPGA design with automated test equipment (ATE) • Perform analysis of digital logical circuits • Design and test digital logical circuits • Document digital logical circuits • Function as lead engineer on designs with high digital content • Evaluate results of projects to assure accomplishment of technical objectives. Prepares and presents reports outlining the outcome of technical projects and makes recommendations for actions necessary to achieve desired results. • Develop System Level Architectures for subsystem designs • Interface with customers and deliver presentations for Preliminary and Customer Reviews. • Results oriented candidate will have BS/BA in Engineering or related with 10 years experience or equivalent experience. MSEE preferred. • Demonstrated leadership skills including ability to motivate others and build strong teams. • Must be able to obtain and maintain a security clearance, which requires U.S. citizenship. Company Name: The Couture Group, Inc. Apply for this Position
10/26/2007 RF/Microwave Design Engineer III This position will design, prototype, and provide sustaining engineering support for custom integrated microwave assemblies and subsystems covering frequency ranges of up to 40GHz, and components such as filters, amplifiers, mixers, oscillators, attenuators, and switches. During the development phase, serves as the project engineer responsible for coordinating all aspects of the project to meet technical, schedule, and cost goals. RESONSIBILITIES INCLUDE: • Generate technical proposals and cost estimates in support of new business development • Present electrical design approach for customer design reviews • Organize, schedule, and manage a full range of complex development projects, including technical requirements, schedule, and cost estimates • Coordinate design efforts for electrical circuits, components, and subsystems including computer/mathematical modeling, part/material/process selection and mechanical layout and packaging. • Coordinate production engineering support function, including fixture, material, design, process problem evaluation and solution • Coordinate with mechanical engineers, designers, and drafters to produce mechanical design and drawing packages • Direct technicians on test, tune, debug, and optimization tasks for prototype circuits and components to meet specification and manufacturing producibility requirements • Perform specification analysis and component design (including creation of a drawing package) using REMEC standard design practices and produce prototype hardware consistent with COMPANY manufacturing producibility requirements • Provide mentorship to junior engineers Qualified candidates will possess: • BS in Electrical Engineering with the knowledge typically gained through 7+ years related • Experience with designing hermetic integrated microwave assemblies • Broadband and narrowband filter, switch, and amplifier design experience from 1 to 18GHz • RF/microwave engineering component/subsystem design experience • Superior technical knowledge in electrical engineering discipline, allowing full range of technical analysis and design • Strong working knowledge of RF design software (MWO, ADS, HFSS), AutoCAD and MS Office Applications • Extensive hands-on experience with RF test equipment, with the ability to troubleshoot RF circuitry. • Strong analytical and problem-solving skills • Excellent oral and written English communication skills • The ability to obtain and maintain a security clearance, which will require US Citizenship Company Name: The Couture Group, Inc Apply for this Position
10/25/2007 Product Engineer Product Engineer Responsible for product design and validation, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test and production personnel in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Analyzes and specifies equipment to establish solutions to complex problems. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports for customers, colleagues and management. Knowledge and design experience with microwave (5-26.5 GHz) and/or millimeter wave (26.5-50 GHz) products and technologies Knowledge and experience with cascaded RF chain design including: Gain, Amplitude and phase flatness, Noise power, Intermodulation, spectral re-growth and noise power distortion, Phase noise, Spurious, Temperature and vibration induced issues Knowledge and experience with: Specifying microwave components, Microwave/millimeter wave component vendors, Isolators, filters, Waveguide Assemblies, Solid State Amplifiers, Linearizers, Cables etc. Knowledge and experience with: Phase noise, AM/AM & AM/PM, phase matching Knowledge and experience of devices including: Power Amplifiers (>25 watts), Frequency converters (up and down), Low noise and medium power solid state amplifiers, PIN diode attenuators, Pre-distortion, Filters, Mixers, Coupler, Power combiners, Power dividers, Waveguide components and transitions Knowledge and experience of mechanical packaging Knowledge and experience digital and analog control systems Knowledge and experience of power supplies Strong knowledge and experience of root cause identification Knowledge and experience with MIL-STD requirements and testing Well-developed analytical skills and well-developed documentation skills Solid practical experience base Creative Enthusiastic team player Disciplined approach to product design, documentation and validation Excellent written and verbal communication skills Able and willing to work in a highly collaborative environment Able and willing to do hands on work Able to appreciate and act on business driven issues Ability to manage projects and project teams Good multi-tasking skills History of successful product development and delivery Able to make appropriate technology choices Demonstrated track record of working closely with other team members in a fast paced environment to bring development concepts into high yield, reliable production components, assemblies and products. Education and/or Experience: Requires a minimum of 5 years of related experience designing, developing and production releasing of products. Requires a BS in Electrical Engineering. MS in electrical engineering preferred. Company Name: Xicom Technology Apply for this Position
09/28/2007 Survivability Engineer 3 - GMD Program Member of the GMD Specialty Engineering Team responsible for GMD compliance with HEMP requirements as well as other related natural and induced environments. Provide survivability subject matter expertise to GMD product teams including support for design reviews, trade-studies, test planning and execution and requirements verification. Applies Boeing best practices and makes enhancements to processes and methods when necessary. Translates contract requirements into work requirements, processes, and tasks. Recommends technical solutions to identified issues, prepares technical reports and briefs management and customers. The candidate will also be responsible to mentor more junior survivability personnel. Travel to remote sites, domestic and abroad, should be expected. Required: A current Secret DoD security clearance and the ability to obtain a Top Secret clearance. Experience identifying the factors affecting electromagnetic compatibility (EMC) of electronic and electrical systems. Ability to apply design techniques and design features to control electromagnetic (EM) susceptibility to natural and induced environments. Broad experience with HEMP (MIL-STD-2169B and MIL-STD-188-125-1/2) requirements and with MIL-STD-461, MIL-STD-464 and lightning protection requirements (MIL-STD-310, NFPA 780), ESD (IEC 61000-4-2). Experience with systems engineering tools (e.g., DOORS). Experience with DoD missile defense programs. The candidate must also demonstrate the following competencies. ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (EEE) DESIGN: Complete knowledge of EM theory to ensure EMC and protect against EM threats (such as High Intensity Radiated Fields (HIRF), lightning effects (direct and indirect), Electromagnetic Pulse (EMP), and precipitation static). Applies knowledge of systems engineering methods, computer aided analysis and modeling, and empirical test results, design principles and requirements throughout the product lifecycle to ensure applicable operational and functional objectives are achieved. Ability to optimize system and component design through a variety of methods including trade studies. Ability to apply EM theory to develop new E3 mitigation techniques and technologies. EEE TEST: Knowledge of EEE measurement techniques, associated test parameters, and limitations of each. Interprets associated test results to validate and verify measurements. Ability to define test article configuration. Ability to apply EM theory to develop new measurement techniques and processes. EM VERIFICATION & VALIDATION: Complete knowledge of EM theory and requirements used to review, interpret, and integrate technical data (such as design details, test results, and analysis) to verify product performance. SYSTEMS THINKING: Evaluates job tasks and processes on how well they help meet team objective(s); identifies non-value-adding components and barriers. Formulates change strategies; seeks input from others to evaluate options for change and encourage buy-in. Makes appropriate changes to job/role structures and processes by communicating effectively and focusing on new skill development. Uses accurate measurement systems to monitor the implementation. Familiarity with DD-1494 frequency management process are a plus. Security Clearance Required: Secret Company Name: The Boeing Company Apply for this Position
09/16/2007 Filter Design Engineer (Tunable Cavity Filters) JOB DUTIES and RESPONSIBILITIES: • Responsible for design activities in product development projects. • Ensure achievement of commitments related to: Specifications Design features affecting cost Schedule Verification and qualification on product development projects. • Responsible for discussing specifications with team management to achieve project goals. • Promotion of COMPANY strengths and technical capability to COMPANY customers and suppliers. • Responsible for following the product development process and procedures. • Responsible for following the most efficient methods of work and identifying opportunities for improvement. • Responsible for maintenance of project documentation according to the ISO procedures and also in accordance with COMPANY global guidelines. • Responsible for all development activity related to design of filter products including but is not limited to simulation, layout design, prototyping, test planning, and testing. • Completing of feasibility studies related to new product opportunities as requested and approved from team management. • Help in project planning (time schedule, budget, manning) by providing realistic estimates of the work load. • Ensure that production and field problems related to design are solved through corrective actions. EXPERIENCE: • Capable of simulating complex filter topologies using simulation SW used in the department. • Can generate conceptual product layouts for products that include cavity filters, coaxial LP-filters, directional couplers, LNA and other PCA assemblies using customer specifications as a requirement and simulation SW (circuit simulator and 3D electromagnetic simulator) as a tool. • Familiar with cavity filter design using dielectric resonators. • Proficient with all common RF test equipment and knowledgeable of their limitations. • Understands and communicates cost impacts of all design details including materials and manufacturability aspects. • EDUCATION: Electrical Engineer or B. Sc. in related field (Math, Physics) with knowledge of RF design and development methods, test equipment, and manufacturing methods or equivalent. Company Name: The Couture Group, Inc Apply for this Position
09/12/2007 Manufacturing Test Engineer Responsible for providing Manufacturing with technical support in: RF Test, Power Supply Test, System Test, and New part/product introduction. Provide technical direction to the test areas to troubleshoot and repair product. Improve the manufacturing test and screening processes that result in cost reductions and increased throughput, and higher reliability. Create and maintain test procedures and specifications. Evaluate microwave components and suppliers. Create Bill of material (BOM) and ECO generation. Failure analysis of various assemblies and components. Provide day to day support to the production lines. Assist Engineering as needed with new product introduction into Manufacturing. Skills/Training Required: · Candidate must have experience using or manufacturing high power microwave devices such as TWTs or Klystrons. · Candidate must be skilled in specifying, and performing high power RF test processes. · Candidate must have experience in cost reduction and reliability improvement through testing and screening. · Candidate must have experience working in a fast paced production environment. · Experience designing products for airborne applications a plus. High Voltage work experience is a plus Years Experience Required: At least five years of experience specifying, and performing RF test processes with high power microwave devices such as TWTs or Klystrons. Education Required: B.S. Degree in Electrical Engineering or equivalent Company Name: Xicom Technology Apply for this Position
08/29/2007 Digital Engineer JOB SUMMARY Designs, debugs, and documents high-speed, high-density digital and mixed signal designs for a variety of KOR product lines. State-of-the-art A/D & D/A converters, KOR’s custom Phase Converter ASICs and the newest FPGA technology are combined to meet the requirements of KOR’s next generation of Radar Environment Simulator (RES), DRFM, and Electronic Warfare (E/W) products. Creates and documents hardware design solutions such as digital circuit design, firmware applications, microprocessor-based board level design, printed circuit board layout, digital signal processing, or real time embedded multiprocessor design. Designs, debugs and documents high-speed digital and mixed signal designs, using scientific analysis and mathematical models to predict and measure outcome and consequences of design. Coordinates with system, software, and RF design efforts to complete project within established timeframe and budget. Participates in regular design review meetings to ensure compliance with established procedures and product requirements. Consults with system engineers and other engineering staff to evaluate interface between hardware and software, and operational and performance requirements of overall system. Provides input for documentation on new or existing programs. Develops and directs testing procedures, programming, and documentation. Coordinates installation of digital system. Works closely with quality assurance in identifying bugs and building and documenting fixes Company Name: KOR Electronics Apply for this Position
08/17/2007 Reliability/Failure Analysis Engineer Perform electrical and physical failure analysis on RF power amplifier products and linear products to support the company goal of improving product reliability and performance. Understand, from a reliability standpoint, the materials, properties, process capability and techniques used in production, particularly in GaAs HBT and Si wafer fabrication. Make recommendations for design engineering, process engineering and packaging engineering on selection, manufacturing, application and test of electronic components and systems. Uses electronic circuit and device physics concepts; develop proficiency in operating FA tools, such as X-ray, C-SAM, photon emission microscope, SEM, FIB, etc. Read circuit schematics and layouts, and applies failure analysis procedures to identify the failure location and the root causes (troubleshooting capability). Write failure analysis reports, including charts and photographs. Co-ordinate with design engineering, process engineering and package engineering to correct the product defect or weakness and to improve the product reliability. REQUIREMENTS: B.S in science or EE. Advanced degree and FA experience required. Hands on lab experience preferred with tool such as optical microscope, X-ray, C-SAM, SEM and photo emission microscope Company Name: The Couture Group, Inc. Apply for this Position
08/17/2007 RF Reliability/Failure Analysis Engineer Perform electrical and physical failure analysis on RF power amplifier products and linear products to support the company goal of improving product reliability and performance. Understand, from a reliability standpoint, the materials, properties, process capability and techniques used in production, particularly in GaAs HBT and Si wafer fabrication. Make recommendations for design engineering, process engineering and packaging engineering on selection, manufacturing, application and test of electronic components and systems. Uses electronic circuit and device physics concepts; develop proficiency in operating FA tools, such as X-ray, C-SAM, photon emission microscope, SEM, FIB, etc. Read circuit schematics and layouts, and applies failure analysis procedures to identify the failure location and the root causes (troubleshooting capability). Write failure analysis reports, including charts and photographs. Co-ordinate with design engineering, process engineering and package engineering to correct the product defect or weakness and to improve the product reliability. Requirements: B.S in science or EE. Advanced degree and FA experience required. Hands on lab experience preferred with tool such as optical microscope, X-ray, C-SAM, SEM and photo emission microscope Client is an innovator of high performance analog and mixed signal semiconductors enabling mobile connectivity. The company's power amplifiers, front-end modules and direct conversion radios are at the heart of many of today's leading-edge multimedia handsets. Leveraging core technologies Company Name: The Couture Group, Inc. Apply for this Position
08/17/2007 ESD Characterization & Test Technician The technician will support engineering activities with respect to ESD such as test, checkout, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment. Applications may include RF, digital and / or logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Performs operational test and fault isolation on systems and equipment. Assists in determining methods or actions to remedy malfunctions. Assists in the design, construction, test and checkout of test equipment. Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus. The position will work in the ESD Characterization and Test Group of the Quality organization Requirements The successful candidate will be expected to train on and then have the primary responsibility for conducting characterization tests such as ESD ( HBM, CDM, MM, IEC-61k). Writing skills are required as the technician will be generating reports. The primary responsibility will be to conduct room temperature ESD testing and RF measurements on semiconductor devices using RF ATE equipment. The ESD and ATE testing requires ability to accurately follow detailed setup instructions (verbal and written), software and hardware selection, verification and calibration procedures. Prior experience with fundamental Electronics, RF circuits, measurements and concepts is preferred Company Name: The Couture Group, Inc. Apply for this Position
08/17/2007 Manager, ESD Characterization and Test Job Description: The individual will manage all activities related to ESD characterization, verification, design review, database management, scheduling and analysis for high-speed active, precision passive circuits of advanced process and module technologies. The individual will manage, mentor, coach the engineers and techs on all the ESD efforts in Company. He/She will provide value added service to design engineering in improving the ESD threshold. The individual will effectively interface between manufacturing and design, and provide guidance in product reliability and ESD protection methodology for analog/mixed-signal/RF ASIC and module design. Requirements: The position requires extended knowledge in semiconductor device physics and circuit design methodology for advanced Si and compound semiconductor technologies. Supervisor skill and a good team player is essential. In-depth understanding of ESD device design and characterization is also necessary. Required skills include 1) Should have managed more than 3 technical people in providing guidance and direction. 2) Hands-on experience of wafer-level characterization for high-speed active, precision analog passive, and ESD devices, facilitate STR builds. 2) Hands-on experience in Cadence Spectre, Virtuoso, ADS and 3D device simulator. 3) Understanding in design methodology for analog/mixed-signal/RF ASIC and module. 4) Understanding and working knowledge of the High Speed / Rf automated test systems including Network analyzer, power meter and synthesizer. Minimum Requirements: Bachelors of Science, Electronics; 5 years relevant experience Company Name: The Couture Group, Inc. Apply for this Position
08/17/2007 ESD Characterization & Test Engineer The individual will perform ESD characterization and analysis for high-speed active, precision passive circuits of advanced process and module technologies. The individual will be responsible for development, QA, and maintenance of foundry model libraries and ESD protection methodology for high-speed mixed-signal and RF application. The individual will effectively interface between manufacturing and design, and provide guidance in product reliability and ESD protection methodology for analog/mixed-signal/RF ASIC and module design. Requirements: The position requires extended knowledge in semiconductor device physics and circuit design methodology for advanced Si and compound semiconductor technologies. In-depth understanding of ESD device design and characterization is also necessary. Required skills include 1) Hands-on experience of wafer-level characterization for high-speed active, precision analog passive, and ESD devices, 2) Hands-on experience in Cadence Specter, Virtuoso, ADS and 3D device simulator. 3) Understanding in design methodology for analog/mixed-signal/RF ASIC and module. 4) Understanding and working knowledge of the High Speed / Rf automated test systems including Network analyzer, power meter and synthesizer. Company Name: The Couture Group, Inc. Apply for this Position
07/12/2007 Test Engineer Successful candidate will be responsible for managing electro-optical tests on wafers, die, imaging sensors and finished cameras. Additionally, the engineer will be responsible for the development, coding, and debug of new test procedures as well as the development and fabrication of new test hardware. Other responsibilities include calibration, maintenance, and repair of Intevac’s test toolset. Primary Job Duties: · Responsible for managing all wafer, die, sensor, and camera testing · Maintain test toolset and instrument calibrations, identify and purchase spare parts, and write toolset preventive maintenance (PM) procedures · Design, program, and debug new test procedures · Design and implement test system upgrades · Manage data collection, analysis, and presentation · Manage data archive on internal servers · Maintain and update documents related to operation of test systems · Interact with device engineering and development groups to improve test implementation, improve image sensor performance, and meet customer test requirements Secondary Job Duties: · Performs other related duties as assigned. Minimum Requirements: · BS in electrical engineering, computer science, physics, or closely related field · 5+ years experience programming in LabView · Experience in characterization and test of optoelectronic devices · Strong analytical and diagnostic skills · Excellent written and verbal communication skills · Proficiency with MS Office Suite · Knowledge of optics and imaging devices would be a plus · US citizenship or Permanent Resident status required Company Name: Intevac, Inc. Apply for this Position
07/10/2007 Systems Engineer Candidate will have expertise in Navigation system design working as a Senior Systems engineer with experience on military or aerospace programs. Expertise in GPS or Differential GPS system design a plus. Candidate will evaluate military operational and technical requirements, and develop System and Segment Specifications. Must have military or aerospace experience developing and documenting system architectures, involving both hardware and software. Must be experienced in performing trade studies and analyses. Will oversee prototype development of hardware/software systems, integration and test activities. Will be responsible for implementing structured systems engineering processes, including preparation and participation in design reviews and other activities. Matlab experience a plus. Must have minimum 7+ years working as a Sr. Systems engineer with experience with aerospace or military programs. Bachelor’s Degree in Electrical Engineering, Aerospace, or Systems Engineering, Masters degree a plus. Must be eligible to obtain a U.S. "Secret" level Security Clearance Company Name: Sierra Nevada Corporation Apply for this Position
06/19/2007 GM/VP COMMUNICATIONS Our client is a division of a multi Billion dollar technology services and products company providing leading edge products and services to defense, government intelligence and commercial customers. The company develops and manufactures a broad range of mission critical systems, which are sold to all branches of the U.S. military forces, government agencies, major aerospace and defense contractors, and international military forces. The newly reorganized Division, located in Northern Virginia , specializes in designing, procuring, integrating, installing, training for and maintaining complex, industrial-grade security systems. Customers include the U.S. Department of Defense, civil federal agencies, state and local government agencies, and large industrial concerns. We are searching for a GM/VP Communications worldwide with a demonstrated track record in operations management, business growth and systems integration. Candidate must have experience in Federal contracting in Net Centric Warfare. EDUCATION Candidate ideally will have a BS or MS in electrical engineering, mechanical engineering, information technology, or related field. EXECUTIVE PROFILE Candidate must have Satellite, Terrestrial, and data communications .Candidate will have ten or more years experience in Federal Government/DOD Communications. Federal government contracting experience is required. Candidate will have five or more years in an operations management capacity in Communications business or a related field with P&L in a for profit business. The GM will have excellent contacts in the Federal Communications community, as evidenced by direct government job experience and/or participation in key recognized professional societies. He or she will be responsible for Tactical Command and Control. RESPONSIBILITIES The GM will have overall operations responsibility for all Federal Communications programs and projects. The GM will be responsible for tactical Command and Control. He or she will be responsible for the overall performance of the business unit; including development and execution of strategic plans, assuring financial performance to annual budgets and plans, oversight and direct participation in key business development efforts, management of high level customer relationships and successful on-time delivery of services, i.e., overall customer satisfaction. This division provides Federal Government customers with Net Centric warfare and Tactical command and Control. The GM leads the company’s ongoing efforts to stay abreast of emerging communications technologies in the federal communications market. He or she also serves as a member of the corporate Federal Systems Management team and participates actively in Federal communications strategy development and implementation. In addition insures compliance with Federal contracting regulations, company ethics policies Company Name: Confidential Apply for this Position
06/15/2007 RF/Microwave Engineer The RF/Microwave Engineer is responsible for the design, development and validation of coaxial cables and connectors. This includes the identification of areas of R&D that address unmet needs and have large potential markets, overview and communication of all projects under development, formulation of proposals and design and developments. This individual should have a Bachelors Degree in Electrical Engineering with some background/experience/classwork in RF/Microwave. Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours. Company Name: Micro-Coax Apply for this Position
06/15/2007 Product Realization Engineer The Product Realization Engineer (PRE) is responsible for the following duties in relation to RF/Microwave coaxial cables, engineered to customer specifications: Participate in all Quote Readiness Reviews Perform final spec review and ensure complete compliance Create test and inspection plans, configure manufacturing process and take corrective actions when needed Control all supplier requirements Oversee all production pilot runs Oversee qualification testing This individual should have a Bachelors Degree in Electrical or Mechanical Engineering with some experience or classwork in RF/Microwave. Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours. Company Name: Micro-Coax Apply for this Position
06/15/2007 Applications Engineer-RF/Microwave The Applications Engineer solves customer’s transmission line problems using Micro-Coax’s products (cable, connectors, cable assemblies and metallized fibers). Provides direct sales assistance interpreting customers' inquiries and specifications. Responsible for customer contact explaining and selling Micro-Coax’s solutions. Responds to customer requests for quotations and proposals on program opportunities for made to print products, estimates job costs, development costs, quotes prices and authors bid proposals. Prepares analysis of competitior’s products and pricing strategies. Transitions program orders into the manufacturing environment. This individual should have a Bachelors Degree in Electrical Engineering with some experience in RF/Microwave. This position will require travel. Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours. Company Name: Micro-Coax Apply for this Position
05/10/2007 Electrical Engineer Do you have the engineering skills and creativity to join a top-notch RF/microwave company in beautiful western New Jersey? Wide Band Systems, a leader in electronic-warfare (EW) modules and systems and microwave frequency synthesizers, seeks an energetic, motivated Electrical Engineer to work with a senior engineer in product design and project/program management for our growing synthesizer product line. The ideal candidate will have at least two years experience in an engineering lab or production environment, designing, testing, and troubleshooting mixed-signal RF/microwave circuits and subassemblies. Experience should include work with frequency synthesizers, an understanding of microwave CAD software, and FGPA design working with VHDL, Visual BASIC, and C++ programming languages. A BS Degree in Electronics or Electrical Engineering from an accredited university is a must, preferably with a concentration in microwave engineering. Company Name: Wideband Systems, Inc Apply for this Position
04/30/2007 DSP Engineer Responsible for research, design, and development of computer software systems, in conjunction with hardware product development. Requires the application of the principles and techniques of computer science, engineering, and mathematical analysis. Analyzes software requirements to determine feasibility of design within time and cost constraints. Consults with electrical or mechanical engineers and other engineering staff to evaluate interface between hardware and software, and operational performance requirements of the overall system. Develops and directs software system testing procedures, programming and documentation. Familiarity with C programming language is required. Responsible for the design and development of embedded software for tactical radio products. Responsible for all phases of the product development including requirement identification, design, test and product support. Will maintain existing software baseline as well as add new features to the product. Firmware includes both general purpose processors as well as DSP firmware. · BSCE or BSEE with 9+ years minimum experience is required. · MSCE or MSEE 7+ years experience is desirable. · Experience in firmware development on embedded processors and DSPs is required. · Experience with software development process is desired. · Experience with C++ and object-oriented design is desired. Harris is an international communications and information technology company serving government and commercial markets in more than 150 countries. Headquartered in Melbourne, Florida, the company has annual sales of about $4 billion and more than 14,000 employees — including more than 6,000 engineers and scientists. Harris is dedicated to developing best-in-class assured communications™ products, systems, and services for global markets, including government communications, RF communications, broadcast communications, and wireless transmission network solutions. Harris is proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing and background checks Company Name: Harris Corp. Apply for this Position
04/30/2007 Product Test Support Engineer PRODUCT TEST ENGINEER - Northern Virginia This position involves the planning for and conducting of stand-alone and integrated testing of Adaptive Methods products during all phases of product life cycle development up to and including verification and validation. Responsibilities to include but not be limited to: • Development, planning, and execution/support of Government Acceptance Testing (GAT) for Adaptive Methods products and services • Evaluation and classification of program GAT requirements and subsequent coordination of requirements definition, risk assessment, and development of approved test and support procedures necessary to meet contractual requirements • Review of testing requirements and support to systems engineering in development of test plans and process • Assist in the development and preparation of test procedures • Perform other duties as assigned by senior managers, officers and directors • Conduct qualification, first article, and support GAT tests • Assist in the evaluation and documentation of test results • Diagnose failures and perform failure analysis Qualifications and Experience: • Must have a BSEE or BSET with minimum of four years experience in government testing and test program execution. • Must have experience with contracts, system requirements definition, and test plan development and execution. • Experience is required in data acquisition, analysis and reporting. • Must be computer literate with prior exposure to programming languages. • Must have experience with sensor interface design and commercial off-the-shelf computer hardware to sensor and software to sensor interfacing • Must be willing and able to travel and work in potentially adverse conditions dealing with off-shore and naval vessel test environments. DESIRABLE JOB SKILLS: • Experience with military testing and approval procedures preferred. • Experience with programming languages and software testing preferred. • Experience with sonar and/or radar systems, and ship to shore radio communications preferred. Travel will be required. Security Clearance required. Affirmative Action Employer Company Name: Adaptive Methods Apply for this Position
04/07/2007 Senior Electrical Engineer (MTS) – 303 The Gaithersburg, Maryland facility is a business unit of DRS Technologies. Employing about 380 people, this business unit provides creative RF solutions to the Department of Defense and prime contractors. The facility designs and manufactures HF, VHF, and SHF tuners and receivers, demodulators, direction finders and wireless intercept solutions. Position Summary The Senior Member of Technical Staff, Digital/DSP, creates a set of requirements, and then designs, develops, documents, tests, modifies, and maintains complex digital hardware devices, or related software, for radio control and signal processing. This position also provides technical leadership on a regular basis. Duties and Responsibilities FPGA design Board-level digital design Digital system design DSP algorithm development and/or implementation Will provide technical leadership and mentoring Will write specifications, interface control documents, design descriptions and test procedures Will contribute to proposals and technical manuals Will provide technical support to Sales and Manufacturing teams Minimum Qualifications Must have BSEE, or equivalent, plus 7 years of relevant experience or MSEE and 5 years of relevant experience Must have a record of success in completing complex FPGA or CPLD designs. VHDL preferred Must have a record of success in completing complex digital circuit card designs Digital signal processing background and experience is desirable Experience writing software for DSP processor chips is a plus Must be able to obtain a high-level security clearance For immediate consideration, please add SMTS303DTN to the subject line and email resumes to: greatjobs@drs-ss.com. Only candidates that meet the qualifications as outlined above will be contacted for further information. Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. DRS is an Equal Opportunity employer and supports a drug free environment. Company Name: DRS Signal Solutions Apply for this Position
04/06/2007 Senior Electromechanical Switch Engineer Our client is in search of qualified engineering personnel. The are currently seeking an individual with a minimum of 3 years + experience in designing, testing, and facilitating all aspects of the Electromechanical Switch department. Experience with production management is a plus. They offer a competitive salary and benefits package. Relocation packages are available About: We strive for low material and production cost in order to offer the best pricing and highest quality possible. Our purchasing power allows us to buy in volume. Our long-term vendor relationships allow us to lock-in the lowest cost. Our 10,000 sq. ft. manufacturing plant enables us to store material in bulk and maintain a large volume of “stock” inventory. Our design team and staff focus on each customer’s individual needs. The company is able to complete engineering and manufacturing tasks in a matter of days, offering hundreds of custom designed products each year. Production and inventory are controlled using a computerized system. This system utilizes an MCLI database which indexes all model numbers and is updated regularly. The company maintains a large inventory of material and utilizes all of its own in-house manufacturing/testing equipment, we have total control of every step in the production process. The entire staff is willing to go the extra mile to satisfy the customers’ needs. Quotations for standard catalog items are typically provided within 24 hours. It is possible to ship in-stock items the very same day they are ordered! They are committed to providing excellent service to thier customers throughout the world. They take pride in our products and our high integrity is demonstrated in every component carrying thier label. Company Name: Defense Talent Network Exe Search Apply for this Position
03/20/2007 Electrical Engineer - Radio Communications/Networking Engineer Job Description: • Principal Radio Communication System Engineer – Perform requirements analysis, technical planning, trade-off analyses, radio system design, system integration, verification and validation, for radio communications products. • Ensure the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule and cost constraints. • Perform functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. Understand and define communications architectures. Qualifications: • BS in Electrical Engineering and a minimum of 8 years of experience with the development of networking communication systems. (MSEE preferred) Experience: • Works with networked communication systems. • Radio system design • Planning, executing and tracking task assignments. • Must have strong technical hardware and/or embedded software design background. • Knowledge and application of Communication Security (COMSEC) and Information Security (INFOSEC) techniques is required. • Familiarity with Security Agencies certification processes, specifically NSA Type I evaluation process and Formal Analysis concepts, knowledge of CMMI and ISO-9001 processes are ideal. Company Name: Harris Corp. Apply for this Position
03/20/2007 Electrical Engineer Join Athena Technologies, Inc. a Fast 500 and Virginia Fast 50 Company! Due to continued growth, we are adding to our Electrical Engineering team. We are seeking enthusiastic, versatile, and experienced Electrical Engineers to perform design, development, and production of flight control hardware systems in a multidisciplinary avionics and aerospace environment. Multiple opportunities for those possessing a Bachelor's Degree in Electrical Engineering and 3-7 years directly related work experience and 10+ years directly related experiences for senior level positions. Experience must include hardware design and development, defining and documenting requirements, testing and debugging, system integration and implementation is required, preferably in an avionics/aerospace environment. Experience must include demonstrated engineering expertise in analog and digital design. Solid analog signal conditioning and digital design using ORCAD, AutoCad, and related engineering and diagnostic tools and equipment required. Senior candidates will have demonstrated technical leadership and customer interface experience. Qualified candidate will possess exceptional interpersonal, written, and verbal communications skills; the ability to manage multiple priorities and deadlines; and a commitment to customer service, quality and teamwork. Positions require US Citizenship or Permanent Resident status. Company Name: Athena Technologies, Inc. Apply for this Position
03/15/2007 Electrical Engineer IV-Radio Program Managers Job Description - External: The position will be responsible for system design and analysis in support of Company's VIDA architecture. This includes, in particular, responsibility for the wireline interfaces of the architecture and for encryption and security. Additional areas of responsibility will include system level requirements analysis, architectural design, interface definition and documentation, and participation in standards activities. The position may include the prototyping, development, documentation and support of core software libraries to be incorporated into WSBU products, including software related to interfaces and security. Travel between Company's facilities and to standards meetings may be required. Experience - External: A Bachelor's Degree in Engineering, preferably Electrical Engineering or Computer Science, with a minimum of 5 years of system engineering experience relevant to the communications field is required. An advance degree and additional experience is desirable. Familiarity with system design methodologies is highly desirable. The position requires a thorough understanding IP protocols. The position requires fluency in the C programming language, with experience in C++ and related languages, as well as Java and related languages highly desirable. Special Requirements Knowledge of and experience with public safety radio protocols such as P25, EDACS, Tetra and OpenSky is highly desirable. Knowledge of and experience with 3G cellular systems (GPRS, UMTS) is desirable. Knowledge of and experience with VOIP protocols (SIP, RTP and related protocols) is highly desirable. Prior participation in standards organizations is desirable. COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 Video Technician NCI Information Systems Inc. in Reston, VA is looking for experienced Senior video Technician who will be required to design, implement and support both video distribution systems and video teleconferencing systems. The support is both installation and maintenance. The candidate should have a strong base in integrating video into existing infrastructure. This includes ATM, IP and voice systems. Required Skills: The successful candidate must have a Bachelors degree in Computer Science or Electrical Engineering, (experience will be considered in lieu of degree), with five (5) years of direct or closely related experience. In addition, this position will require detailed knowledge of all aspects of video technology including video generation, distribution and display. It will also require current knowledge of ANSI/IEEE formats for analog and digital systems, broadband cable, NTSC/HDTV and ISDN. Qualified candidates will have superior working knowledge and experience to support the base systems. Manage video switches, Fore ATM equipment, PictureTel video conferencing equipment, Lucent 5ESS switching systems (ISDN) including Craftec test set, Canaga Perkins fiber modems, Cisco 2590, Polycom, and Avaya G3 platform Cryptographic devices (KIV, KG, DES). Company Name: NCI Apply for this Position
03/15/2007 ELECTRICAL ENGINEER III Job Description - RESPONSIBILITIES Candidate will be responsible for the planning, configuration, deployment and maintenance of wired and wireless data communication systems in a lab and a field environment. Requires knowledge of Cisco routers and switches, TCP/IP and wireless LANs. CCNA preferred. BS or AS with experience. Background in network security and software applications a plus. Some travel. Candidate will be responsible for the planning, configuration, deployment and maintenance of wired and wireless data communication systems in a lab and a field environment. Requires knowledge of Cisco routers and switches, TCP/IP and wireless LANs. CCNA preferred. BS or AS with experience. Background in network security and software applications a plus. Some travel. COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader. Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 ELECTRICAL ENGINEER IV RF/Microwave/millimeter wave design engineer responsible as part of a team for the design, development, and implementation of high performance, integrated microwave assemblies for commercial and military applications. The successful candidate will have knowledge in the design and implementation of RF/Microwave/millimeter wave circuits. The candidate must be comfortable with component level circuit design (NF, Gain, IIP3), system level performance specifications, microwave board design, and issues encountered in the design/implementation of highly integrated multi-function assemblies. M.S EE or PhD in EE with experience in the design of RF/Microwave/millimeter wave circuits. Good understanding of fundamental RF and Microwave circuit design principals; good understanding of analog circuit design principals; experience in EDA tools (specifically ADS and Cadence environmental); experience in full-wave modeling of passive printed circuits using 3-D electromagnetic simulators (Sonnet em and Ansoft HFSS); Good mathematical background and good team player. COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader. Company Name: The Couture Group, Inc. Apply for this Position
03/15/2007 TECHNICAL ASSOCIATE V RESPONSIBILITIES This person will work within the Strategic R&D group to support the development of new microwave/millimeter-wave wireless communication devices/systems and millimeter wave sensors. As such, the position requires sound practical knowledge of RF and microwave test techniques and an appreciation of microwave fixturing and calibration issues. Specific responsibilities include: ' Device characterization: including S-parameter, noise figure and spectral measurements ' Transceiver testing ' Test results statistical analysis, parameter correlation and yield analysis ' Support development of semi-automated test stands A Bachelor's degree in EE with bias toward RF/microwave engineering. Familiarity with RF & microwave test instrumentation including RF power, spectral, scattering parameter and noise figure measurements. Strong documentation, communication and organizational skills desired. Some experience with test automation software and RF/microwave EDA tools such as Agilent ADS preferred. Some experience with statistical analysis software packages such as Minitab preferred. Special Requirements Must be able/willing to work in a lab environment. Must be prepared to work overtime as needed to support a high growth business. COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader. Company Name: The Couture Group, Inc. Apply for this Position
03/08/2007 Electrical Engineer (174547-598) Description Prepares specifications (design, test, acceptance, etc.). Performs calculations and selects components. Designs subsystems and components. Obtains information from suppliers and vendors. Supervises technicians. Prepares documentation of methods and procedures. Implements tests and documents test data. Performs related work as required. More detail can be provided. Qualifications: Bachelor’s degree in engineering or a related field and a minimum of 10 to 15 years of engineering experience, or any equivalent combination of experience and training which provides the required knowledge, skills, and abilities. Knowledge of engineering practices and techniques. Proven proficiency in designing, testing, etc., of engineering systems and subsystems. Capability to understand, interpret, and generate engineering documentation. Efficiency in writing specifications, work statements, and proposals. Company Name: NCI Apply for this Position
03/08/2007 Principle Electrical Engineer - FPGA Development Principal Electrical Engineer Qualifications Proficient in HDL based FPGA design flows for Xilinx FPGA’s. Proficient in designing deeply embedded systems using widely available microcontrollers. Understanding of modern control systems theory. Familiarity with TCP/IP, Ethernet, Fibrechannel, PCI bus, VME bus, and MIL_STD1553B bus. Familiarity with Military Standards for Airborne Electrical Equipment. Familiarity in Real-time embedded Operating Systems (VxWorks, embedded Linux). Proficient in evaluating the performance of Single Board computers in VME or CPCI form factor. Willing to travel in the U.S. 10% to 15% of the time. Experience: Master’s degree in Electrical Engineering is preferred 8 years experience in relevant industries US citizenship and ability to obtain a security clearance required Some supervision of electrical engineering personnel Job Duties: Lead a team and contribute to the design, manufacture, test, and integration of custom interface CCA’s for devices and sensors. Specify and manage the procurement of electronics enclosures. Specify and evaluate single board computers for I/O and compute performance. Work with software engineering department to develop and test hosted software. Manage the overall effort of producing the Programs electrical subassemblies and of delivering those subassemblies for system integration, including being responsible to the Program’s management for meeting cost and schedule allocations for that effort. Manage the Earned Value Management process for the electrical subsystems. Company Name: L-3 Communications Services Group, Intelligence Solutions Division Apply for this Position
01/15/2007 Principle Design Engineer ESSENTIAL DUTIES and RESPONSIBILITIES Develop electrical design concepts that meet the product specifications in a product development environment. - Performs integration design tasks of active/passive circuits and sub-assemblies into the top-level integrated designs. - Develops and implements design verification test plans at sub-assembly levels. Generates detailed test reports including presentation of all data, introductions, conclusions, and recommendations to a professional engineering standard. - Maintains comprehensive Engineering notebooks documenting all general technical activities. Provides direct line manager with weekly activity summary (activities accomplishments and issues). - Provides technical support to Manufacturing, Quality and Reliability organizations for failure analysis, root cause and corrective action assessment, technical training and yield improvement efforts. - Maintain knowledge of current technical advancements in the general field of RF/Digital electronics commensurate with the Principal Engineering level by keeping up with the current developments and trends in area of expertise. - Manages technical project teams with overall responsibility for technical performance, cost and schedules, interfacing with customers, internal departments and outside vendors as needed. - Directs, coordinates, and exercises functional authority for planning, organizing, integration, and completion of engineering project within assigned responsibility. - Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications. - Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems. 1. Participate and assist in the transfer activities of product from engineering into production, 2. Assists in developing and implementing action plans for cost reduction activities 3. Works with Product Manager in the creation of internal development plans and status reporting to customer for development efforts 4. Track and report on key metrics for technical and financial performance 5. Coordinates quotation efforts for all development efforts Experience - BSEE with 8+ years or M.S. with 5+ years - 5+ years of RF circuit design or RF applications engineering experience - Solid experience working with customers on analyzing RF circuits and components for wireless infrastructure equipment. - Skilled in RF measurement techniques as well as using RF development tools such as AUTOCAD, ADS, HFSS or Sonnet. - Experience in engineering validation, testing, and debugging - Excellent written and oral communication skills - Ability to travel as required - Must understand the working and design of: -Microwave and RF theory. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Staff Electric Engineer Job Description - -An understanding or interest in analog circuit design, development and test, specifically: -Operation amplifiers, comparators and LSI and MSI logic circuits. -Components, such as capacitors, inductors, resistors, and transistors, in both SMT and 'Chip' format. -Power supplies, power converters including switchers and linear Regulators. -Packaging, including hybrid and PCB circuits, with a basic understanding of ME10 and AutoCAD design tools. -A general understanding of basic RF components such as -Bias circuits -PIN diode and MESFET switches -Linear and digital attenuators -amplifiers -detectors -Analytical Software tools -PSpice, 5Spice or similar programs. As part of the engineering team, the responsibilities include the design, development and implementation of circuits for use in complex military and space-based products. Experience - BSEE degree and 0 - 3 years experience in the design of analog circuit design, development and test. US Citizenship and the ability to be granted a DOD Security Clearance is required. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Sr. Electric Engineer Job Description: Hardware engineer for broadband product development. Candidate will participate in development and testing of COMPANT's WiMAX product solutions. Primary responsibility will be in designing and verifying the digital content of new wireless communication products. Experience - Minimum education of BS degree in Electrical Engineering Relevant coursework should include Digital Integrated Circuits, Computer Architecture, Signals and Systems, and High Performance Digital System Design. Experience with VHDL program development and familiarity with board fabrication and SMT assembly methods is desirable. The candidate must possess hardware analysis and debugging skills using standard test instruments. Candidate must be motivated and work well in a diverse team environment. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/15/2007 Electric Engineer Job Description, including experience, education and skills required: This position is for a lab manager/technician with experience supporting engineers of all electrical design disciplines, including digital, analog and RF. The qualified candidate will: ' Provide lab support to staff of about 25 engineers (RF, analog, digital, FPGA, board, etc.) ' Manage lab, including acquisition/tracking/calibration of test equipment ' ESD control and monitoring ' Develop, fabricate and assemble Test board for DTx mixed signal ICs, including ' Schematic entry, layout (or interface to layout folks), bill of materials; generation of test plans ' Be proficient in the test, debug, data collection and presentation for analog, digital, and RF boards and associated ICs ' Design of circuits and software to facilitate test and debug Experience - This position requires a minimum of an ASEE and 5 years experience as a lab manager and technician. It also requires good verbal and written communication skills as the candidate will be required to work within a close-knit multi-disciplinary team, interface with 3rd party vendors/partners, and document/present design work. Opportunity for career growth. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position
01/11/2007 Sr. Electro-Optic Design Engineer Essential Job Functions Include: Manage R&D team working on Hyperspectral imaging/non imaging systems. Design and construct testbeds and prototypes spanning UV to LWIR. Design and execute proof-of-principle experiments and phenomenology studies. Works extensivley with digital imaging sensors, optical imaging systems, tunable filters, lasers, and photodides. Assist in technical proposals and presentations. Requirements: M.S. in Electrical Engineering or Physics. Ph.D desired. 6-8 years experience. DoD experience highly desired. Experience with photonic and electro-optic device and system level design/modeling. Experience with some of the following: FPA, hyperspectral measurements, polarimetric imaging and software/hardware data processing. Clear verbal and written communication skills. Excellent interpersonal skills. EOE Company Name: Clean Earth Technologies LLC Apply for this Position
11/21/2006 Senior High Voltage Power Supply Engineer The qualified candidate will act as the Responsible Engineer for the design and development of high-power-density, high-voltage power supplies and high voltage transmitters. The candidate is also responsible for contributing to the technical guidance of the modulator topology for future generations of microwave transmitters containing compact high voltage power supplies. Will be expected to develop an understanding of related subsystems in the power supplies and transmitter systems of legacy CPI BMD products and potentially support those modules with sustaining engineering tasks. Qualifications: BSEE or related field At least 10 years experience with high-voltage power supply design Detailed knowledge of high-voltage power electronics theory and operation Detailed knowledge of high-power modulator theory and operation Detailed knowledge of liquid cooling of switch mode power supplies and solid state power electronics Knowledge of CAD and analysis tools such as ORCAD Knowledge of safety and compliance requirements Knowledge of reliability testing and analysis Knowledge of thermal and power management Company Name: Communications & Power Industries, Inc. Apply for this Position
11/2/2006 Applications/Systems Engineer The Application/Systems Engineer will be responsible for learning the company’s products from a design, assembly and test perspective. The selected individual will also be responsible for understanding customers’ desired or required changes and seeking ways of incorporating those changes into existing or new products. The person may be required to develop prototypes to meet customer requirements or show proof of concept. The person must be an individual that enjoys the hands on experience of working with communications equipment and the audio accessories that go with it. Qualifications Required • Bachelors Degree in Electrical Engineering or equivalent experience • At least four (4) years of increasingly responsible experience. • Demonstrated track record of achieving results • Excellent oral and written communication skills • A good working knowledge of MS Office. Desired • Prior US Military experience as a communicator or electronics repair technician • Prior experience with tactical communications audio accessories • Ability to interact with US and Non US Military customers. • Excellent presentation skills • Experience with CCI Equipment Company Name: Silynx Communications, Inc. Apply for this Position
11/2/2006 T&E Engineer At J.F. Taylor, Inc., our primary business is engineering and professional services in support of United States military aviation programs. We are located in Southern Maryland near the Patuxent River Naval Air Station. Founded in 1983, our core projects are in hardware and software systems, aircraft training and simulation devices, systems engineering, test support, and instrumentation of real-time data systems. We are a hands-on technical company comprised of electrical and mechanical engineers and technicians, computer scientists, and professional support personnel. Although our expertise is in engineering services, as a full-service contractor we provide a wide range of project management and administrative services as well. We have immediate Test and Evaluation (T&E) support openings on our Communication, Navigation and Identification (CNI) F/A-18 Radio and MIDS/JTRS Programs with the U.S. Navy. Engineering support for F/A-18 Comm T&E flight test programs including flight test planning, coordination, execution, analysis, and reporting activities. Some travel required. BS in Electrical Engineering preferred. F/A-18, Comm systems, and/or aircraft avionics test experience a plus. U.S. Citizenship and ability to obtain a Secret clearance required Company Name: J.F. Taylor, Inc. Apply for this Position
9/26/2006 ELECTRICAL ENGINEER Successful candidate shall be responsible for the total design process from initial concept development, through prototype fabrication and testing, to the fabrication of the final product. Maintain an expertise in detector and acquisition electronics, digital imagery, and radio and satellite communications. Maintain, operate and install detector data acquisition systems in local and remote field environments. Interface with personnel from the Department of Defense, National Nuclear Security Administration, and other government agencies. Successful candidate will be required to serve as a member of a deployable emergency response team available for travel on short notice; and will be required to carry a pager, be available for emergency recall 24-hours a day. Successful candidate shall possess a Bachelors degree in Electrical Engineering or field related to the position, or equivalent training and experience, plus a minimum of 2 years related professional experience; knowledge of radiation detection systems; knowledge and experience to safely use a wide assortment of electronic test equipment, hand and power tools; and ability to implement microprocessor technology and its interface with analog circuitry; professional electronic engineering knowledge of principles and theory of analog and digital electronics. Must be able to perform duties in all weather and climate conditions, including arctic, tropical, and desert conditions. Must be capable of lifting and carrying 50 lbs, as well as walking long distances carrying heavy loads. NSTec offers a competitive salary and benefits package such as: • Three weeks of paid time off per year • 80 hours of paid holidays per year • Group insurance (health/dental/vision) • Basic life insurance (1.5 times of annual salary) • Short- and Long-term disability insurance • 401(k) Thrift Plan (100% vested after three years) • Retirement Plan (100% vested after five years) • Relocation assistance from originating city Company Name: National Security Technologies, LLC Apply for this Position
9/24/2006 Research Engineer--Radiometry This is an individual-contributor position which involves applying knowledge of optics, mechanical engineering, electrical engineering, physics, or related fields to the solution of diverse technical problems. Responsibilities include modeling the infrared / thermal properties of air and ground systems and predicting infrared signatures. Emphasis is on predicting infrared signatures as a function of material properties. Responsibilities include assisting in the design, execution, and interpretation of optical and infrared measurements of materials, devices, treatments, and systems. Some client interaction is required, as are contributions to technical reports, presentations, and proposals. This position requires a BS/MS in physical sciences or engineering with up to 5 years relevant experience (some flexibility depending on qualifications). Hands-on experience with MuSES or similar tool for the prediction of infrared signatures is essential. Requires solid understanding of thermal modeling and radiometry, plus experience with MATLAB, C{PLS}{PLS}, or similar. To be considered, applicants must currently possess an active security clearance (Secret or L level), or a clearance that was active within the last 24 months. Some mix of expertise in the following areas is desirable: understanding of infrared sensors and systems, field testing of materials, components, and systems, remote sensing, MODTRAN, BRDF rendering, infrared materials, multilayer materials, infrared sources and backgrounds, and general optical system analysis skills. We are seeking a results-oriented individual, with a proven ability to work independently, and as a strong team contributor. An ability to solve technical problems in multiple disciplines, and an interest in multiple technical areas, is desirable Company Name: EOIRCareers Apply for this Position
9/9/2006 Principal RF Antenna Design Engineer Responsible for the design of implantable, body-worn, and external RF antennas for medical implantable communication systems. Perform electro-magnetic simulations and analysis of prototype antenna designs and develop novel concepts to overcome application constraints. Design and verify antenna matching/filtering circuits and other related RF circuits. Implement designs through to build-up of working prototypes. Perform laboratory measurements and analysis using state of the art RF instrumentation to verify simulated models. Define and lead antenna performance measurements at external test facilities. Prepare and present performance results for these antennae designs to department staff and other internal customers. Engage with communication system developers and recommend system level trade-offs for antenna performance, form factor, packaging and radio system constraints. Provide leadership in general RF design practices, as well as specific area of antenna expertise commensurate with experience level. Develop and maintain a current knowledge of industry practices in miniature antenna systems and advances in technology. Participate in reliability testing of overall communication systems. Conduct simulations of path-loss/propagation for antenna systems (RF port-to-RF port) for various instrument and implant/body-worn configurations. Company Name: Medtronic, Inc. Apply for this Position
8/30/2006 Principal Electrical Engr Program Engineer responsible for engineering content on production and follow-on development programs. The Program Engineer has the Responsibility, Accountability, and Authority for engineering decisions on a program. The Program Engineer will report to the director of Program Engineering. Responsibilities include: -Engineering Point of Contact to resolve production related questions and issues -Engineering Point of Contact with domestic and international customers -Assisting with the preparation of follow-on development proposals -International travel when required -Responsible for the engineering program cost and schedule (engineering products produced on time, within budget, and to the correct technical level) -Participation in management and engineering reviews with senior level management -Responsible for ensuring that the proper mix of engineering technical resources are available -Responsible for ensuring that engineering processes are in place and are followed -Responsible for ensuring that technical planning for the program execution is completed -Accountable Functionally to the director of Program Engineering -Accountable on the program to the Program Manager Required Skills: A minimum of five years of experience is required with each of the following: Ability to manage engineering development efforts, including systems, hardware, and software on multiple, related programs. Must understand and be able to apply Earned Value Management principles. Must be competent and successful at customer and production interaction Company Name: Raytheon Apply for this Position
10/11/2006 Principal Electrical Engr Job skills and qualifications include a minimum of 4+ years of design experience working in a highly ordered design environment. The ARM department performs subsystem and component level design supporting military EHF (20/44GHz), military and commercial SHF (C, X, & Ku-Band), and military and commercial Ka-Band (20/30GHz) products. Electrical Engineers in the ARM department of PDC develop state of the art, solid state and TWT power amplifiers, LNAs, LNBs, frequency converters, receivers, frequency synthesizers, fixed and agile frequency sources, and references. The successful candidate will have the capability to lead card and module designs to satisfy subsystem design requirements using stripline, microstrip, and waveguide technologies. The ideal candidate will have experience supporting both new development as well as an existing product line of SATCOM and ATC radars systems. Desired design experience covers from Q-band to L-band, with experience in simulation tools such as ADS. Demonstrating expertise with Six Sigma knowledge is a plus and designs for Six Sigma experience will insure that your resume makes the first cut. As a minimum the candidate will have a B.S. in Electrical Engineering and a Masters is preferred Company Name: Raytheon Apply for this Position
8/10/2006 Principal Electrical Engr RF systems and RF board level design, analog, digital interface, and IF to microwave RF design experience, including various microcontroller and digital signal processing (DSP) experience with digital modulation and demodulation is highly desirable. Design, troubleshoot, and simulate RF, Analog and Digital circuits, including the circuit level design of PLL's, VCO's, filters, broadband and narrow band amplifiers, detection circuits, mixing circuits, direct signal synthesizers, attenuators, switching circuits, AGC systems, and audio/video modulation/demodulation. Experience with Matlab DSP analysis tools desirable. Very High Level Design Language (VHDL) and Field Programmable Gate Array (FPGA) knowledge a plus. Knowledge of Microsoft Project, DOORS, and CMMI documentation methods and concepts is a plus. Knowledge of networking protocols and implementations a plus. Willingness to travel is a plus. Required Education(including Major): Successful completion of a 4 year accredited BS degree in Electrical Engineering is required. Advanced degrees and coursework in Electrical Engineering or Computer Science disciplines is highly desirable. Company Name: Raytheon Apply for this Position
8/10/2006 Electrical Engineer (E3) Highly motivated individual needed to execute analysis and flowdown of electromagnetic interference/compatibility/pulse (EMI/EMC/EMP), and lightning specifications to system, sub-system and circuit levels. Work as part of the design team to design electrical and mechanical solutions to meet imposed and derived requirements. Analyze designs and predict emission and susceptibility levels. Perform on-site and off-site tests for conducted/radiated emissions and susceptibility. Provide leadership in troubleshooting performance issues encountered during EMC verification and provide solutions. Generate required documentation and reports. Present results at internal and external reviews. Represent company to customer on technical matters. Provide interface between department and internal programs. Prepare cost and technical proposals; manage schedules and budgets of assigned tasks. Some travel required. Company Name: Raytheon Apply for this Position
8/8/2006 ELECTRICAL TEST ENGINEER III Senior Level position. The Test Engineer III is generally the project test lead for medium to large engineering projects; typically tasked with test development and resource allocation derived from system requirements, test definition, content and technical execution. This is a supervisory position, possibly supervising engineers working on several different projects. This position often requires the application of creative engineering solutions and innovative engineering techniques in addition to standard engineering practices and defined processes Company Name: Spectral Systems Inc. Apply for this Position
8/4/2006 Electronic Engineer Applicants must have Electrical or Computer Engineering degree. Must also have knowledge of C/C++, VxWorks, Real-time operating systems, FPGA design and development, micro-controllers and computers and familiarity with Identification Friend or Foe (IFF) protocols and operating modes. This position is located in scenic and historic Southern Maryland in the St. Mary's County Technology Corridor adjacent to the Patuxent River Naval Air Station. Relocation assistance is available for qualified candidate. Company Name: BAE Systems Apply for this Position
8/3/2006 Electrical Systems Engineer This position involves all aspects of Systems Engineering for a major Naval Launching Systems Development Program for a new class of US Navy Ship. Major efforts will include Requirements Engineering, Trade Study Reviews, Preparing and Reviewing Engineering Change Proposals (ECPs), and all aspects of System Engineering as the design progresses through the major program milestones. Work will be in direct support of NSWC/Dahlgren Division (Code G21). Some travel to other contractor facilities may be required. * Active DoD security clearance. * BS Electrical Engineering plus a minimum of 2 yr professional engineering experience. Company Name: BAE Systems Apply for this Position
8/1/2006 Principal Systems Engineer This position is for a computer or electrical engineer to serve as an expert and project leader for research and development of advanced embedded systems within the Advanced Technology Center. This will entail the development of innovative concepts involving a broad range of embedded computing technologies for the military electronics and commercial aviation markets (e.g., power efficient computing, adaptive computing, mobile computing, high assurance computing, real-time systems, networks). The candidate is expected to have a proven track record in identifying and capturing external R&D funding. In addition, candidates must have excellent communication skills and the ability to work in a team environment. As a member of the Advanced Technology Center, the candidate must have excellent problem solving skills, be self-motivated, and have a willingness to learn new technologies. An advanced degree in computer or electrical engineering is preferred. Candidates must have the ability to obtain a DoD Security Clearance. Company Name: Rockwell Collins Apply for this Position
8/1/2006 Sr. Electrical Engineer This position requires design and research experience in antenna technology, phased array antenna, antenna/vehicular siting/co-site analysis, and passive distributed circuit device design for the HF through mmWave frequency spectrum in the support of avionics radio system designs. The applicant should have strong people and project leadership skills with experience in project engineering/management to enable their growth into a future section manager position for an antenna technology applied R&D group. The applicant should with the ability to balance cost, schedule, and performance goals throughout a product design life cycle. In addition, the applicant should possess strong interpersonal skills, work well within a design team environment and be adept at interfacing with outside customers and funding agencies. A working knowledge of contemporary Electro-Magnetic (EM) simulation techniques such as the Finite Element (FEM), Method of Moments (MoM), Finite Difference Time Domain (FDTD), and Geometric Theory of Diffraction (GTD) is required. Working knowledge of EM/circuit simulation tools should include Ansoft HFSS, Agilent Momentum, Ansoft Ensemble/STRATA, NEC, GNEC, or similar computational electromagnetic simulation tools. A working knowledge of contemporary microwave circuit simulation tools, such as the Agilent ADS tool suite, is also required. The applicant must have a broad knowledge of various radiating element types (monopole, dipole, helical, etc), reflector and associated feed types (parabolic, Cassegrian, etc.) and passive microwave circuit technology (microstrip, waveguide, etc.). Antenna metrology experience is required. Phased array design experience, including feed networks, in the L through Ka Bands and experience is required. Company Name: Rockwell Collins Apply for this Position
7/30/2006 Sr. Electrical Project Lead Engineer This position is responsible for leading a technical development team that designs motor control products from initial customer proposal through production launch. Provide senior level electrical and system design leadership for aerospace motor control applications using brush, brushless, and induction motors. Work with electrical, mechanical, and motor design leads to partition and allocate product requirements. Create original design block diagrams, allocate customer requirements to system components, design electrical circuits, select electrical components for operation over –55C to +125C temperatures, oversee prototype hardware build, evaluate design capability, perform worst case circuit analysis, analyze designs for failure modes, and support qualification testing. Perform MatLab and Simulink control system analysis to establish component requirements. Use Pspice to design and analyze component level circuits for position, velocity, and torque control using high power switching transistors, analog signal devices, field programmable gate arrays, discrete logic devices, embedded microcontrollers, digital signal processors, etc. Mentor engineers. Development of cost estimates and project schedules. Provide technical support for electronics suppliers. Company Name: Eaton Corporation Apply for this Position
7/30/2006 ELECTRICAL DESIGN ENGINEER – STAFF LEADER Requirements * THIS POSITION REQUIRES AN ACTIVE (CURRENT OR WITHIN PAST 2 YEARS) U.S. GRANTED SECRET SECURITY CLEARANCE. * Bachelors Degree in Electrical Engineering (Masters preferred). * Minimum 10 years electrical design experience to include 5 years of engineering supervisory experience in a COMSEC environment. * Electrical design experience should include US Government Type 1 Cryptography, Red/Black isolation design, Embedded microprocessor (Intel), power management design, and programmable logic design, FPGA, memory design, and interface logic design, proficiency in FPGA Designs (Altera and/or Xilinx). * Engineering supervisory experience should include budgeting and technical proposal generation. * Skilled experience in Mentor Design Tools and application, Schematic Capture tools, VHDL. * Proficient in MS Project scheduling tools and applications. * Proficient in MS Office. Company Name: Sypris Electronics Apply for this Position
7/30/2006 ELECTRICAL DESIGN ENGINEER – STAFF LEADER Responsibilities * Leads a moderately complex electrical hardware configuration item development effort. * Derives a full set of electrical hardware design requirements from high-level electrical hardware performance requirements. * Generates specific electrical hardware detailed functional block diagrams and designs for complex functions of electrical hardware configuration items. * Directs/conducts overall design and worse case timing/loading/stress/tolerance analyses for moderate sized electrical hardware configuration item designs. * Generates specific cost/schedule approach for electrical hardware subsystems. Requirements * THIS POSITION REQUIRES AN ACTIVE (CURRENT OR WITHIN PAST 2 YEARS) U.S. GRANTED SECRET SECURITY CLEARANCE. * Bachelors Degree in Electrical Engineering (Masters preferred). * Prefer 5 - 7 years electrical/electrical design experience preferably to include US Government Type 1 Cryptography, Red/Black isolation design, Embedded microprocessor (Intel), power management design, and programmable logic design, FPGA, memory design, and interface logic design. * Proficient in FPGA Designs (Altera and/or Xilinx). * Skilled experience in Mentor Graphics Design Architect, Schematic Capture tools, VHDL. * Efficient in circuit design analysis and associated CAD tools as well as circuit test and appropriate lab test equipment. Company Name: Sypris Electronics Apply for this Position
6/16/2006 Sr. Systems Engineer: DSP Algorithm Development The successful applicant will support and/or lead the design and development activities of a team of systems engineers in the development of state-of-the-art digital signal processors (FPGA-based) for airborne applications. Candidates will perform analysis and design trades, develop system design concepts and DSP algorithms, verify the designs/algorithms, and support transition of the designs/algorithms to firmware or software implementations. Company Name: Spectral Systems Inc. Apply for this Position
6/16/2006 SYSTEMS ENGINEER IV •Lead role in the architecture, development, integration, and engineering management of a technologically advanced intelligence collection system program •Day-to-day responsibilities will include application of requirements and system knowledge to design and implementation decisions as well as overall technical leadership for the program •Assigned tasks will require the application of creative engineering solutions and innovative engineering techniques in addition to standard engineering practices and defined processes •Leadership skills and management expertise are required •Position includes interaction with management and with customer technical/ management customers •Position requires travel within the US Company Name: Spectral Systems Inc. Apply for this Position
6/16/2006 ELECTRICAL TEST ENGINEER III The successful candidate will lead a small test team in the planning and execution of system test and integration for an advanced RF signal collection and processing system Will be responsible for the day-to-day supervision of the test team in addition to participating in test activities Position requires travel within the US Company Name: Spectral Systems Inc. Apply for this Position
6/16/2006 ELECTRICAL ENGINEER II Mid-level engineering position that is often assigned as the leader for small to mid size programs and performs without close supervision. Plans, organizes implements, evaluates small engineering efforts, and applies innovative solutions to engineering problems. Takes hardware designs from concept through system integration. May supervise one or more less experienced engineers. Regularly required to review the work of junior engineers and identify additional required efforts. Fully capable of defining the technical architecture and program content and developing engineering solutions for small to mid size programs. engineers. Regularly required to review the work of junior engineers and identify additional required efforts. Fully capable of defining the technical architecture and program content and developing engineering solutions for small to mid size programs. Company Name: Spectral Systems Inc. Apply for this Position
5/19/2006 Chief, Electrical Engineer Candidate will be responsible for overall power plant electrical design, from high voltage interconnection down through step up transformers, medium and low voltage, including equipment specification and selection. * The electrical systems engineering duties also include oversight responsibility for overall plant DCS control systems, with solid experience with multiple DCS vendor equipment. * This position is an individual contributor role. * B.S. in Electrical Engineering * Ten to twenty years experience in the power generation field. * Experience with primary design responsibility for gas turbine based power plants. Company Name: RMS, Inc. Apply for this Position
5/9/2006 Electrical Systems Designer The position will require the definition, maintenance and release of engineering product data in electronic datasets or drawings. Designs and engineering data must be reviewed to ensure they are integrated, clearly communicated, accurate, under configuration control, complete and that they conform to standards, procedures, and regulatory requirements. Selected candidates will assist in the development of complete minor components or portions of major systems or the modification of existing designs Company Name: Ian Martin Apply for this Position
4/27/2006 ELECTRICAL / ELECTRONICS JOB DUTIES: The Wiring Manufacturing Engineer will support the Airborne Early Warning & Control (AEW&C) Wiring Integrated Product Team (IPT) and Modification IPT as part of the Integrated Defense Systems (IDS). The Wiring IPT is responsible for design and procurement of Wire Harness Assemblies (WHA), including modified and the new aircraft wiring and new AEW&C mission wiring. The Modification IPT is responsible for modification, installation, test, and delivery of the AEW&C Airborne Mission System. Significant interface is required with internal and external suppliers, Mission Systems IPTs, Aircraft Hardware IPTs, the modification factory, and foreign suppliers for aircraft modification and parts fabrication. The candidate will be responsible for WHA producibility analysis, Wiring Information and Release System (WIRS) M.E. releases, procurement, fabrication, installation, and test required to support integration of the AEWC system. The candidate will provide manufacturing inputs into WIRS to satisfy planning, procurement, and configuration control requirements. The position may require some travel for supplier surveys, interface, oversight, and factory support. Company Name: Ian Martin Apply for this Position
5/8/2006 Electrical Engineering Technician The Electrical Engineering Technician will work on the design of electrical assemblies and production test fixtures for advanced HF/VHF/UHF two-way radio products and systems. Responsibilities will include development, fabrication and testing as well as documentation and production/customer support of the completed products. Responsibilities also include building prototype circuits and maintaining engineering documentation Company Name: Titan Corp - CEWD Apply for this Position
5/7/2006 Sr. Electrical Engineer We are currently seeking experienced, hands-on Sr. Electrical Engineers to join our team. This position requires a close working relationship with all departments within the company. This position must “drive”, co-ordinate and design electrical and electronic projects and, be responsible for development for new products, as well as provide support for manufacturing. Company Name: Quantronix Corporation Apply for this Position
5/4/2006 Sr. Electrical Engineer This position requires design and research experience in antenna technology, phased array antenna, antenna/vehicular siting/co-site analysis, and passive distributed circuit device design for the HF through mmWave frequency spectrum in the support of avionics radio system designs. Company Name: Rockwell Collins Apply for this Position
aerospace engineer, analog design engineer, antenna frequency, antenna theory, antenna wave, army engineer, asic design engineer, asu electrical engineering, automotive engineer, average salary electrical engineer, average salary engineer, average salary for electrical engineer, basic electrical engineering, berkeley electrical engineering, best electrical engineering schools, bs electrical engineering, career engineer, careers engineer, careers in electrical engineering, circuit design engineer, columbia electrical engineering, computer engineer, computer science engineer, cornell electrical engineering, cover letter engineer, cv engineer, department of electrical and computer engineering, department of electrical engineering, design development, design engineer, design planning, design projects, Electric Engineer, electric engineering, electric engineers, electric power engineering, electrical and computer engineering, electrical and computer engineers, electrical and electronic engineering, electrical and electronic engineers, electrical and electronics engineer, electrical and electronics engineering, electrical and electronics engineers, electrical computer engineer, electrical computer engineering, electrical consulting engineers, electrical design engineer, electrical engineer, electrical engineer career, electrical engineer careers, electrical engineer college, electrical engineer consultant, electrical engineer degree, electrical engineer education, electrical engineer employment, electrical engineer information, electrical engineer intern, electrical engineer internship, electrical engineer interview, electrical engineer job, electrical engineer job description, electrical engineer jobs, electrical engineer pay, electrical engineer position, electrical engineer positions, electrical engineer resume, electrical engineer resumes, electrical engineer salaries, electrical engineer salary, electrical engineer starting salary, electrical engineer training, electrical engineer wages, electrical engineering, electrical engineering 101, electrical engineering and computer science, electrical engineering articles, electrical engineering basics, electrical engineering career, electrical engineering careers, electrical engineering companies, electrical engineering company, electrical engineering consultant, electrical engineering consultants, electrical engineering consulting, electrical engineering curriculum, electrical engineering degree, electrical engineering degrees, electrical engineering department, electrical engineering design, electrical engineering dictionary, electrical engineering education, electrical engineering firm, electrical engineering firms, electrical engineering hambley, electrical engineering handbook, electrical engineering info, electrical engineering information, electrical engineering job, electrical engineering job description, electrical engineering jobs, electrical engineering magazine, electrical engineering major, electrical engineering masters, electrical engineering news, electrical engineering online, electrical engineering positions, electrical engineering program, electrical engineering programs, electrical engineering project, electrical engineering projects, electrical engineering reference, electrical engineering research, electrical engineering resume, electrical engineering resumes, electrical engineering salaries, electrical engineering salary, electrical engineering services, electrical engineering society, electrical engineering software, electrical engineering starting salary, electrical engineering symbols, electrical engineering tech, electrical engineering technician, electrical engineering technology, electrical engineering terms, electrical engineering tools, electrical engineering training, electrical engineering tutorial, electrical engineering undergraduate, electrical engineering universities, electrical engineering university, electrical engineers, electrical engineers salary, electrical mechanical engineering, electrical power engineer, electrical power engineering, electro engineering, electro mechanical engineering, electro optical engineering, electronic engineer, electronics engineer, employment engineer, engineer calculation, engineer companies, engineer institute, engineer job openings, engineer lab, engineer laser, engineer manager, engineer physics, engineer position, engineer projects, engineer solutions, engineer system, engineer systems, engineer technology, entry level electrical engineer, entry level electrical engineer jobs, entry level electrical engineering, entry level electrical engineering jobs, entry level engineer, experience engineer, fundamentals of electrical engineering, georgia tech electrical engineering, graduate electrical engineering, gsm antenna, hardware design engineer, ic design engineer, information on electrical engineering, infrared radiometry, institute of electrical and electronic engineers, institute of electrical and electronics engineers, institute of electrical engineers, institution of electrical engineers, introduction to electrical engineering, job description engineer, job design, job engineer, job search engineer, jobs design, jobs engineer, jobs for electrical engineers, jobs in electrical engineering, laser optic, manufacturing engineer, masters in electrical engineering, mechanical electrical engineer, mechanical engineer, michigan electrical engineering, microstrip antenna, microwave antenna, microwave radiometry, military engineer, minnesota electrical engineering, mit electrical engineering, online electrical engineering degree, optic sensor, optic sensors, penn state electrical engineering, phd electrical engineer, phd electrical engineering, phd engineer, phd in electrical engineering, physical design engineer, princeton electrical engineering, principles and applications of electrical engineering, probability and random processes for electrical engineering, product design engineer, professional electrical engineer, project design, project engineer, purdue electrical engineering, research engineer, resume engineer, resumes engineer, rf antenna, rf design engineer, rf engineer, salaries for electrical engineers, salary engineer, salary for electrical engineer, salary for electrical engineers, salary of electrical engineer, salary survey engineer, sample electrical engineering resumes, school of electrical engineering, science engineer, senior electrical engineer, senior engineer, society of electrical engineers, standard handbook for electrical engineers, stanford electrical engineering, starting salary for electrical engineers, system design, tamu electrical engineering, technical engineer, testing design, the electrical engineering handbook, top electrical engineering, ucla electrical engineering, ucsd electrical engineering, uiuc electrical engineering, university of florida electrical engineering, university of michigan electrical engineering, university of minnesota electrical engineering, university of washington electrical engineering, upenn electrical engineering, us news electrical engineering, usc electrical engineering, virginia tech electrical engineering, vlsi design engineer, wireless antenna DSP, digital signal processing, electrical engineering, electrical engineer, ELECTRICAL TEST, antenna, frequency, radio system, two-way radio, RF signal collection, DSP algorithms, Microwave Systems, RF Electrical, electromotive, Amplifiers, filters, mixers, switches, passive devices, RFIC Design, Power amplifiers, Modulators, demodulators, Oscillators, PLLs, device models, Filters, 1xRTT (CDMA), Binary Runtime Environment for Wireless (BREW), Code-Division Multiple Access (CDMA), Cellular Digital Packet Data (CDPD), Enhanced Data GSM Environment (EDGE), Global System for Mobile Communications (GSM), Local Multipoint Distribution Services (LMDS), Palm Query Application (PQA), Short Message Service (SMS), Time Division Multiple Access (TDMA), Universal Mobile Telecommunications System (UMTS), WCDMA, 3G, Bluetooth, Extensible Authentication Protocol (EAP), Frequency-Hopping Spread Spectrum (FHSS), General Packet Radio Service (GPRS), High Performance Radio Local Area Network (HiperLAN), Orthogonal Frequency Division Multiplexing (OFDM), S/key, Shared Wireless Access Protocol (SWAP), Ultra Wide Band (UWB), Web clipping application (WCA), Wireless Application Protocol (WAP), Wired Equivalent Privacy (WEP), Wireless ASP (WASP), WLAN (LAWN), Wireless Transport Layer Security (WTLS)
Automation/Robotics Technician, Electromechanical Technician , Electro-Mechanical Technician, Laser Electro-Optical Technician, Semiconductor Equipment Operator , Semiconductor Equipment Technician, Integrated Circuit Design Engineer, Integrated Circuit Designer, ASIC Designer, ASIC Engineer, Digital Design Engineer, Director of Engineering, Mechatronic Engineer, Electronics Engineering Officer , Electronics Engineering Associate, Electronics Engineer, Electronic Manufacturing Test Engineer, Test Engineer - Electronic Manufacturing
Circulating Process Inspector - Electronics, Inspector, Process - Electronics, Transformer Inspector - Electronics, Wiring Inspector - Electronics, Wave-Soldering Machine Operator - Electronics, Flow-Solder Machine Operator - Electronics, Integrated Circuit Fabricator, Wafer Fab Operator - Electronics, Weld Inspector - Electronics, Coil Winder - Electronics, Insulator Cutter And Former - Electronics, Insulator - Electronics, Coil Former, Template - Electronics, Coil Winder, Open Slot - Electronics, Coil Winder, Strap - Electronics, Armature Coil Winder - Electronics, Audio-Coil Winder - Electronics, Bender, Armature Coil - Electronics, Bobbin-Coil Winder - Electronics, Coil Finisher - Electronics, Coil Taper - Electronics, Coil Winder, Hand - Electronics, Field-Coil Winder - Electronics, Filament-Coil Winder - Electronics, Helix-Coil Winder - Electronics, Resistor Winder - Electronics, Transformer-Coil Winder - Electronics, Electric-Motor Winder - Electronics, Armature-and-Rotor Winder - Electronics, Coil Assembler - Electronics, Armature Winder - Electronics, Rotor Winder - Electronics, Stator Winder - Electronics, Insertion Machine Tender, Electronic Components , Automatic Component Insertion Operator - Electronics, Component Insertion Operator, Electronic Components , Capacitor Assembler - Electronics, Electronics Inspector , Inspector, Raw Quartz - Electronics, Check Inspector - Electronics, In-Process Inspector - Electronics, Inspector, Subassemblies - Electronics, Inspector, Printed Circuit Boards, Circuit Board Inspector , Touch-Up Inspector, Printed Circuit Boards, X-Ray Technician, Printed Circuit Boards , Electronics Assembler , Inspector, Component Parts - Electronics, Checker - Electronics, Line Inspector - Electronics, Capacitor Inspector - Electronics, Electron Gun Inspector - Electronics, Filter Inspector - Electronics, Resistor Inspector - Electronics, Tube Inspector - Electronics, Supervisor Casting-and-Pasting - Electronics, Supervisor, Grid-Casting-And-Pasting - Electronics, Supervisor, Plate Pasting - Electronics, Supervisor, Electronics Processing, Supervisor, Capacitor Processing - Electronics, Supervisor, Electron Tube Processing, Supervisor, Integrated Circuit Manufacturing, Supervisor, Printed Circuit Board Processing, Supervisor, Process Testing - Electronics, Supervisor, Semiconductor Wafer Manufacturing, Supervisor, Punch-and-Assembly Department - Electronics, Core-Assembly Supervisor - Electronics, Machining-and-Assembly Supervisor - Electronics, Supervisor, Floor Assembly - Electronics, Supervisor, Instrument Assembly - Electronics, Supervisor, Electronic Coils, Supervisor, Coil Winding - Electronics, Supervisor, Filter Assembly - Electronics, Supervisor, Coil Winding - Electronics, Armature-and-Field-Assembly Supervisor - Electronics, Supervisor, Printed Circuit Board Assembly, Supervisor, Final - Electronics, Supervisor, Post-Wave - Electronics, Supervisor, Pre-Wave - Electronics, Supervisor, Quality Control - Electronics, Supervisor, Testing - Electronics, Supervisor, Burning, Forming, and Assembly - Electronics, Supervisor, Battery Assembly - Electronics, Supervisor, Lead Burning - Electronics, Supervisor, Plate Forming - Electronics, Supervisor, Dry-Cell Assembly - Electronics, Supervisor, Radio Interference - Electronics,
California,Texas,New York,Florida,Illinois,Pennsylvania,Ohio,Michigan,Georgia,New Jersey,North Carolina,Virginia,Massachusetts,Washington,Indiana,Tennessee,Arizona,Missouri,Maryland,Wisconsin,Minnesota,Colorado,Alabama,Louisiana,South Carolina,Kentucky,Puerto Rico,Oregon,Oklahoma,Connecticut,Iowa,Mississippi,Arkansas,Kansas,Utah,Nevada,New Mexico,West Virginia,Nebraska,Idaho,Maine,New Hampshire,Hawaii,Rhode Island,Montana,Delaware,South Dakota,Alaska,North Dakota,Vermont,District of Columbia,Wyoming, USA, The USA, United States, United States of America, US, Canada, North America
AL, AK, AS, AZ, AR, CA, CO, CT, DE, DC, FM, FL, GA, GU, HI, ID, IL, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, NY, NC, ND, MP, OH, OK, OR, PW, PA, PR, RI, SC, SD, TN, TX, UT, VT, VI, VA, WA, WV, WI, WY
aerospace jobs, aircraft electrician jobs, apprentice electrician jobs, apprentice jobs, apprenticeship jobs, automotive jobs, bangalore jobs, building jobs, canada jobs, career jobs, careers jobs, carpenter jobs, carpentry jobs, civil jobs, computer jobs, construction jobs, department jobs, design jobs, dubai jobs, electric career, electric careers, electric company jobs, electric employment, electric engineering jobs, electric job, electric jobs, electric newspaper, electric power jobs, electric utility jobs, electric work, electrical apprentice, electrical apprentice jobs, electrical apprentices, electrical apprenticeship, electrical apprenticeships, electrical automotive, electrical building, electrical canada, electrical career, electrical careers, electrical companies, electrical computer, electrical construction, electrical construction jobs, electrical course, electrical courses, electrical department, electrical design, electrical designer jobs, electrical employment, electrical engineer, electrical engineer job, electrical engineer job description, electrical engineer jobs, electrical engineering, electrical engineering job, electrical engineering job description, electrical engineering job outlook, electrical engineering jobs, electrical engineers, electrical engineers job, electrical engineers jobs, electrical estimator jobs, electrical india, electrical industry, electrical inspector jobs, electrical job, Electrical Jobs, electrical journeyman, electrical lineman, electrical lineman jobs, electrical linemen, electrical maintenance, electrical manufacturing, electrical mechanic, electrical mechanical, electrical plumbing, electrical positions, electrical power, electrical programs, electrical project, electrical project manager jobs, electrical projects, electrical research, electrical skills, electrical technician, electrical technician jobs, electrical technology, electrical trade, electrical trades, electrical trainee, electrical training, electrical welding, electrical work, electrician career, electrician careers, electrician employment, electrician helper jobs, electrician job, electrician job description, electrician job openings, electrician job outlook, electrician job search, electrician jobs, electrician jobs in michigan, electrician positions, electrician work, electricians job, electricians jobs, electricity jobs, electricity work, electronic electrical, electronic jobs, electronics career, electronics careers, electronics employment, electronics job, electronics jobs, electronics newspaper, electronics work, employment jobs, engineering jobs, engineers jobs, entry level electrical engineer jobs, entry level electrical engineering jobs, fitter jobs, general electric job, general electric job opportunities, general electric jobs, graduate jobs, india jobs, industrial electrical, industrial electrician jobs, industrial jobs, industry jobs, it jobs, job description electrical, jobs at general electric, jobs companies, jobs electrical, jobs engineer, jobs for electrical engineers, jobs for electrician, jobs for electricians, jobs in electrical, jobs in electrical engineering, jobs in the electrical, jobs in the electrical industry, jobs manager, jobs opportunities illinois electrician, jobs opportunities illinois villages electrical, jobs technician, jobs vacancies, jobs vacancy, jobs work, journeyman electrician jobs, journeyman jobs, lineman jobs, linemen jobs, london jobs, maintenance jobs, manufacturing jobs, master electrician job, master electrician jobs, mechanic jobs, mechanical jobs, millwright jobs, modern jobs, ontario jobs, plumber jobs, plumbers jobs, plumbing jobs, power career, power careers, power employment, power job, power jobs, power positions, power work, project jobs, recruitment jobs, research jobs, salary jobs, singapore jobs, skills jobs, student jobs, students jobs, technical jobs, technology jobs, trade jobs, trades jobs, trainee jobs, training jobs, uae jobs, uk electrical, uk jobs, wages jobs, welding jobs, wiring job, wiring jobs, wiring work,